3"/2" ATCO AHN5X ND80/ND50 BALL VALVE AHN5X
3"/2" ATCO AHN5X ND80/ND50 BALL VALVE AHN5X
The document outlines the specifications for the Perolo ND50/80 ATCO™ FULL BORE self-contained ball valve. It is designed for use as a fluid inlet/outlet valve, suitable for fitting a 2" ball valve onto a 3" existing flange. The valve is made from 316L / 1.4409 stainless steel and features a compact design.
Dimensions and Weight:
- Nominal diameter: 50mm (2")
- Weight: 6.85 Kg
- Face to face: 81 mm
Flange Drilling:
- Inlet flange drilling: 4 x Ø18 x 160PCD & 6 x Ø14 x 168 PCD
- Outlet flange drilling: 4 x M16 x 125 PCD
Pressure and Temperature Ratings:
- Working Pressure: 16 Bar / 4 bar for HT
- Test Pressure: 24 Bar / 6 bar for HT
- Working Temperature: -40°C to +150°C
- Design Temperature: -40°C to +250°C
- Maximum Temperature: 190°C / 250°C for HT
Materials and Seals:
- Valve material: 316L / 1.4409 stainless steel
- Seat material: Standard PTFE seal (16 Bar), HT 250°C PTFE/Graphite seal (4 Bar)
Control and Operation:
- Handle: 1/4 Turn or Remote Control
- Remote Control: RMT 53 Operation
Accessories and Conformity:
- Accessories include stud kit, outlet gasket, weld-in flange, recess flange, blind flange, and bolting kit.
- Complies with ADR / IMDG / RID / EN14432 standards.
- Approved by Bureau Veritas, A-C-I.
Additional Features:
- The valve includes options for gauge connections and protection, sealing, steam heating, and HALAR coating for high corrosion resistance.
Notes:
- Specifications may change without notice due to continuous product improvement.
- Customers are responsible for ensuring compatibility between valve materials and the transported product.
Contact Information:
PEROLO SAS, 69 Rue des Maçons, 33390 Blaye, FRANCE
Phone: +33 (0)5 5742 67 00
Email: [email protected]
Catalog excerpts
3"/2" ATCO AHN5X ND80/ND50 BALL VALVE AHN5X The Perolo ND50/80 ATCO™ FULL BORE self-contained ball valve is designed to be used as a fluid inlet/outlet valve. A perfect solution to fit a 2" ball valve onto a 3" existing flange SPECIFICATION Nominal diameter Weight Inlet flange drilling Outlet flange drilling Working Pressure Test Pressure Working Temperature Design Temperature NB: temperature range vary according to o'ring material ACCESSORIES Weld-in flange Recess flange Blind flange Bolting Kit Outlet gasket Inlet gasket Remote Control Stud kit CONFORMITY, CERTIFICATION & APPROVAL Complies with ADR / IMDG / RID / EN14432 Approved by Bureau Veritas, A-C-I STANDARD FEATURES (See Codification for option) Made of (material) 316L / 1.4409 stainless steel Compact design Face to face 81 mm Operation Handle 1/4 Turn or Remote Control* Ball gaskets material PTFE or PTFE/Graphite for HT° *clockwise opening for standard * Other drilling patterns on request Due to our policy of continuous product improvement, specifications may change without notice - Specification sheet PWA 11 17 07 20 00 F It is the customer's responsability to check the compatibility between valves material and transported product. PEROLO SAS, 69 Rue des Maçons, 33390 Blaye, FRANCE -Phone : + 33 (0)5 5742 67 00 - Email : [email protected] BALL VALVE
Open the catalog to page 1
3"/2" ATCO AHN5X ND80/ND50 BALL VALVE AHN5X CODIFICATION STANDARD PART NUMBER YOUR PART NUMBER MATERIAL - Other on request 316L / 1.4409 stainless steel SEAT MATERIAL & MAWP Standard PTFE seal 16 Bar HT 250°C PTFE/Graphite seal 4 Bar INLET FLANGE - other on request 4xØ18x160PCD & 6xØ14x168PCD OUTLET FLANGE - other on request 4 x Ø17 x 125 PCD 4 x M16 x 125 PCD 4 slotted x Ø18 x min 114 PCD GAUGE CONNECTION Without 1/4'' NPT gauge connection & drilled ball 1/4'' BSP gauge connection & drilled ball With drilled ball only (H2O2) GAUGE PROTECTION Without With Without With HALAR COATING For coated...
Open the catalog to page 2All PEROLO catalogs and technical brochures
ND500 MULTIDO2 Pages
Bursting Discs1 Page
