2" (DN50) H2O2 Breather HYDROGEN PEROXYDE H2O2 BREATHER
2" (DN50) H2O2 Breather HYDROGEN PEROXYDE H2O2 BREATHER
The document outlines the specifications for a 2'' H2O2 breather used on hydrogen peroxide tanks. It is designed to vent the tank during transport and consists of two sintered discs. The first disc acts as a filter for compressed air during unloading operations, while the second disc limits the water flow rate in case of tank rollover. The breather has a high filtering capability, limiting the liquid flow rate to a maximum of 1 liter per hour at 0.2 Bar pressure. The working pressure is 4 Bar, and the working temperature ranges from -40° to +190°C. The breather is certified by Lloyd's Register Verification and TUV.
The breather includes a connection with 6 holes x Ø11 x 105 PCD and 4 holes x Ø18 x 125 PCD. It has a nominal diameter of 50mm (2") and weighs 3 kg. The document also lists various part numbers for different configurations and accessories, such as a 2'' BSP cap with chain and sintered disc kits.
Accessories include a screw kit, stud kit, and various filters for low and high flow rates. The document emphasizes the importance of checking compatibility between valve materials and the transported product.
The breather complies with ADR, IMDG, and RID standards. It is made of materials such as PTFE and FEP/Silicone for the setting gasket.
The document advises customers to verify the compatibility of valve materials with the transported product and notes that specifications may change without notice due to continuous product improvement.
Catalog excerpts
2" (DN50) H2O2 Breather HYDROGEN PEROXYDE H2O2 BREATHER 2'' H2O2 breather - used on Hydrogen Peroxyde tanks to vent the tank during transport - This product is composed by 2 sintered discs. One in the body acts as a filter for the compressed air when pressurizing the tank in unloading operations. In case of tank rollover, the liquid flow rates goes through the second disc. The second disc limits the water flow rate. The high filtering capability of the discs limit the liquid flow rate at 1 ltr/h max at 0.2 Bar pressure in the tank. SPECIFICATION Nominal diameter Weight Connection Working Pressure ACCESSORIES Weld-in flange 6xM10x105 Test Pressure Working Temperature Temperature range may vary according to the seal material Complies with ADR / IMDG / RID Notified Body : Lloyd's Register Verification - TUV High flow filter Setting Gasket PTFE & FEP/Silicone CONFORMITY & CERTIFICATION STANDARD FEATURES (See Codification for option) SAFETY RELIEF VALVE Due to our policy of continuous product improvement, specifications may change without notice - Specification sheet PWA 11 15 13 20 00 F It is the customer's responsability to check the compatibility between valves material and transported product. PEROLO SAS, 69 Rue des Maçons, 33390 Blaye, FRANCE -Phone : + 33 (0)5 5742 67 00 - Email : [email protected]
Open the catalog to page 1
2" (DN50) H2O2 Breather HYDROGEN PEROXYDE H2O2 BREATHER CODIFICATION H2O2 breather - low flow rate - drilling: 6 holes x Ø11 x 105 PCD PTFE filter Ø10 - water flow rate < 1L/h at 0.2 bar pressure Part Number: 11 15 13 00 00 H2O2 breather - high flow rate - drilling: 6 holes x Ø11 x 105 PCD PTFE filter Ø15 - 1,5L/h < water flow rate < 3L/h Part Number: 11 15 13 00 00 B H2O2 breather - low flow rate - drilling: 4 holes x Ø18 x 125 PCD PTFE filter Ø10 - water flow rate < 1L/h at 0.2 bar pressure Part Number: 11 18 37 00 00 H2O2 breather - high flow rate - drilling: 4 holes x Ø18 x 125 PCD PTFE filter...
Open the catalog to page 2All PEROLO catalogs and technical brochures
ND500 MULTIDO2 Pages
Bursting Discs1 Page
