Permatex copper anti seize lubricant
1Pages

{{requestButtons}}

Catalog excerpts

Permatex copper anti seize lubricant - 1

Toll Free: 87 PERMATEX (877-376-2839) 10 Columbus Blvd., Hartford, Connecticut 06106 6875 Parkland Boulevard, Solon Ohio 44139 Technical Data Sheet Permatex Copper Anti-Seize Lubricant AAM Revised 10/02 PRODUCT DESCRIPTION S.I.N.: 834-300 Permatex Copper Anti-Seize Lubricant is a high temperature, premium quality copper anti-seize and thread lubricant. It contains a high percentage of micro-fine copper flakes in a semi-synthetic, grease carrier and fortified with high quality rust and corrosion inhibitors. Meets Mil Spec A-907. PRODUCT BENEFITS Permatex Copper Anti-Seize was designed specifically for use on stainless steel or similar alloys. It protects threaded fasteners and fittings from heat, freezing, seizure or galling at temperatures from -30°F to 1800°F. It may be used on pumps, sensors, valves, nuts and bolts where extreme conditions of heat exist. Permatex Copper Anti-Seize also provides good electrical conductivity. TYPICAL APPLICATIONS • • • • • • • Spark plug threads installed into aluminum heads Exhaust manifold and engine bolts Oxygen sensors Knock sensors Thermostat housing bolts Fuel filter fittings Battery cable connections DIRECTIONS FOR USE 1. Clean mating surfaces before application. 2. For best results, apply to clean, dry surfaces. 3. Clean surfaces with Permatex Brake & Parts Cleaner. 4. Wire brush any loose surface rust. 5 Apply Copper Anti-Seize to the parts that require protection. 6. Reassemble parts using normal torque values. 7. Wipe off excess material. GENERAL INFORMATION This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a lubricant for chlorine or other strong oxidizing materials. For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). ORDERING INFORMATION Part Number 31163 09128 09126 Container Size 16 oz. brush-top bottle 8 oz. brush-top bottle 1 oz. carded tube STORAGE Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8_ to 28_C (46_ to 82_F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. NOTE The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. Permatex, Inc. specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Permatex, Inc. products and disclaims any liability for consequential or incidental damages of any kind, including lost profits. This product may be covered by one or more United States or foreign patents or patent applications. For Cleanup 1. Clean parts with disposable towel. 2. Clean hands with Permatex brand hand cleaners. PROPERTIES OF MATERIAL Chemical Type Appearance Odor Specific Gravity Temperature Range, _C (_F) Viscosity, cPs Flash Point, °C(°F) NFPA 704 Flammability Rating Typical Value Grease Copper metallic paste Light petroleum 1.2 -22(-30) to 982(1800) 200,000 (base) 149(300) 1 NOT FOR PRODUCT SPECIFICATIONS. THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY. PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION. PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)

Open the catalog to page 1

All PERMATEX catalogs and technical brochures