Nickel anti seize lubricant 77134
1Pages

{{requestButtons}}

Catalog excerpts

Nickel anti seize lubricant 77134 - 1

Toll Free: 87 PERMATEX (877-376-2839) Technical Data Sheet 10 Columbus Blvd., Hartford, Connecticut 06106 6875 Parkland Boulevard, Solon Ohio 44139 PRODUCT DESCRIPTION Permatex® Nickel Anti-Seize Lubricant is a high temperature, high quality, heavy duty lubricant that resists galling and corrosion and reduces wear in heavy pressure applications. It contains tenacious metals, oils and graphite materials that cannot be burned away or removed by slow moving parts. This product withstands temperatures ranging from -65°F to 2400°F (-54°C to 1316°C). It is recommended for use where copper contamination must be avoided, under conditions of extreme pressure and temperature and with stainless steel, titanium and nickel alloys. OEM recommended. PRODUCT BENEFITS Permatex® Nickel Anti-Seize was designed specifically for use on stainless steel or similar alloys. It protects threaded fasteners and fittings from heat, freezing, seizure or galling at temperatures from -65°F to 2400°F. It may be used on pumps, sensors, valves, nuts and bolts where extreme conditions of heat exist. TYPICAL APPLICATIONS • Exhaust manifold bolts • Exhaust system bolts • Muffler clamps • Tailpipe assemblies • Catalytic converter assemblies DIRECTIONS FOR USE 1. Clean mating surfaces before application. 2. For best results, apply to clean, dry surfaces. 3. Clean surfaces with Permatex® Brake & Parts Cleaner. 4. Wire brush any loose surface rust. 5 Apply Nickel Anti-Seize to the parts that require protection. 6. Reassemble parts using normal torque values. 7. Wipe off excess material. Permatex® Nickel Anti-Seize AAM Revised 10/11 GENERAL INFORMATION This product is not recommended for use in pure oxygen and/or oxygen rich systems. For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). ORDERING INFORMATION Part Number 77134 77124 77164 Container Size 0.5 oz tube, carded 8 oz. brush-top bottle 16 oz. brush-top bottle STORAGE Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8°C and 28°C (46°F and 82°F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. NOTE The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. Permatex, Inc. specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Permatex, Inc. products and disclaims any liability for consequential or incidental damages of any kind, including lost profits. This product may be covered by one or more United States or foreign patents or patent applications. For Cleanup 1. Clean parts with disposable towel. 2. Clean hands with Permatex® brand hand cleaners. PROPERTIES OF MATERIAL Chemical Type Appearance Odor Specific Gravity Temperature Range, °C (°F) Viscosity, cPs Flash Point, °C(°F) NFPA 704 Flammability Rating Typical Value Mineral oil, nickel, graphite Gray paste Petroleum 1.1 -54(-65) to 1316(2400) 200,000 (base) 93(200) 1 NOT FOR PRODUCT SPECIFICATIONS. THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY. PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION. PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX) Permatex is a trademark of Illinois Tool Works, Inc. ©2011 ITW Permatex, Inc. All rights reserved.

Open the catalog to page 1

All PERMATEX catalogs and technical brochures