84115 5 MINUTE PLASTIC WELD (ADHESIVE)
10Pages

SAFETY DATA SHEET Revision Date 10-Sep-2018 Version 7 Product identifier Product Name 84115 5 MINUTE PLASTIC WELD (ADHESIVE) Other means of identification Product Code R478ADH2 Recommended use of the chemical and restrictions on use Recommended Use Adhesive Uses advised against No information available May Also Be Distributed by: ITW Permatex Canada 101-2360 Bristol Circle Oakville, ON Canada L6H 6M5 Telephone: (800) 924-6994 Details of the supplier of the safety data sheet Manufacturer Address ITW Permatex 6875 Parkland Blvd. Solon, OH 44139 USA 24-hour emergency phone number Chem-Tel: 800-255-3924 International Emergency: 00+1+ 813-248-0585 Contract Number: MIS0003453 E-mail address: mail@permatex.com OSHA Regulatory Status This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Label elements _Emergency Overview Signal word Danger Causes skin irritation Causes serious eye irritation May cause an allergic skin reaction Suspected of causing cancer May cause respiratory irritation English chemical name

R478ADH2 - 84115 5 MINUTE PLASTIC WELD (ADHESIVE) Appearance Off-white Physical state Viscous liquid Odor Methyl methacrylate Precautionary Statements - Prevention Obtain special instructions before use Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Avoid breathing dust/fume/gas/mist/vapors/spray Use only outdoors or in a well-ventilated area Wash face, hands and any exposed skin thoroughly after handling Contaminated work clothing should not be allowed out of the workplace Precautionary Statements - Response...

R478ADH2 - 84115 5 MINUTE PLASTIC WELD Revision Date 10-Sep-2018 (ADHESIVE) _____________________________________________________________________________________________ 4. FIRST AID MEASURES Description of first aid measures General advice Get medical advice/attention if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Skin contact IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower....

R478ADH2 - 84115 5 MINUTE PLASTIC WELD (ADHESIVE) Environmental precautions See Section 12 for additional Ecological Information. Methods and material for containment and cleaning up Methods for containment Prevent further leakage or spillage if safe to do so. Methods for cleaning up Eliminate all ignition sources if safe to do so. Ensure adequate ventilation. Soak up with inert absorbent material. Sweep up and shovel into suitable containers for disposal. Prevention of secondary hazards Clean contaminated objects and areas thoroughly observing environmental regulations. 7. HANDLING AND...

R478ADH2 - 84115 5 MINUTE PLASTIC WELD (ADHESIVE) Individual protection measures, such as personal protective equipment

Revision Date 10-Sep-2018 Possibility of Hazardous Reactions None under normal processing. Conditions to avoid Heat, flames and sparks. Incompatible materials Strong oxidizing agents, Reducing agents Hazardous Decomposition Products Carbon oxides Nitrogen oxides (NOx) 11. TOXICOLOGICAL INFORMATION Information on likely routes of exposure Inhalation Eye contact Skin contact Ingestion May cause irritation of respiratory tract. Contact with eyes may cause irritation. May cause redness and tearing of the eyes. May cause skin irritation and/or dermatitis. May cause sensitization by skin contact....

Revision Date 10-Sep-2018 Target Organ Effects Eyes, Respiratory system, Skin. The following values are calculated based on chapter 3.1 of the GHS document . ATEmix (oral) 3826 mg/kg ATEmix (dermal) 3352 mg/kg 12. ECOLOGICAL INFORMATION Ecotoxicity 31.5 % of the mixture consists of component(s) of unknown hazards to the aquatic environment Persistence and degradability No information available. Bioaccumulation No information available. Mobility No information available. Chemical Name Other adverse effects No information available Waste treatment methods Disposal of wastes Contaminated...

R478ADH2 - 84115 5 MINUTE PLASTIC WELD (ADHESIVE) DOT UN/ID No Proper shipping name: Hazard Class Packing Group Emergency Response Guide Number 1133 Adhesives, Limited Quantity (LQ) 3 II 128 1133 Adhesives, Limited Quantity (LQ) 3 II F-E, S-D IATA UN/ID No Proper shipping name: Hazard Class ERG Code IMDG UN/ID No Proper shipping name: Hazard Class Packing Group EmS-No Complies Complies Complies Not determined Complies Complies Complies Complies 15. REGULATORY INFORMATION International Inventories TSCA DSL/NDSL EINECS/ELINCS ENCS IECSC KECL PICCS AICS Legend: TSCA - United States Toxic...

R478ADH2 - 84115 5 MINUTE PLASTIC WELD (ADHESIVE) CWA (Clean Water Act) This product contains the following substances which are regulated pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40 CFR 122.42) U.S. State Right-to-Know Regulations Chemical Name U.S. EPA Label Information EPA Pesticide Registration Number Not applicable WHMIS Hazard Class B2 - Flammable liquid, D2B - Toxic materials 16. OTHER INFORMATION, INCLUDING DATE OF PREPARATION OF THE LAST REVISION NFPA Health hazards 2 Flammability 3 Instability 0 - HMIS Health hazards 2 Flammability 3 Physical hazards 0...

R478ADH2 - 84115 5 MINUTE PLASTIC WELD Revision Date 10-Sep-2018 (ADHESIVE) _____________________________________________________________________________________________ materials or in any process, unless specified in the text. End of Safety Data Sheet _____________________________________________________________________________________________ Page 10 / 10 English chemical name