UV-Curable Adhesives Permabond single-part epoxy adhesives are suitable for bonding a wide variety of materials. They are available with a range of different viscosities and characteristics. Permabond epoxies have been developed to offer a high standard of performance for demanding applications.Permabond UV curable adhesives are suitable for a variety of applications. They are excellent for bonding glass to glass or glass to metal and form very high strength bonds for load bearing joints, such as those found in glass furniture and display cases. Permabond UV curable adhesives form strong and durable bonds. Permabond UV curable adhesives cure during exposure to ultra violet light. The adhesives contain photo-initiators that react to specific wavelengths of light to cure the adhesive. Flexible and stress absorbing, Permabond UV curable adhesives are suited to applications where substrates with different thermal expansions need to be bonded. Permabond UV curable adhesives bond a wide variety of plastics. Some clear plastics contain UV stabilizers that block the transmission of UV light, however, Permabond has formulated plastic bonding adhesives with UV and visible light curing capabilities to allow these plastics to be bonded. Permabond's technical staff can help you identify the UV transission characteristics of the plastic you are using and assist you with selecting the best product for your application. UV adhesives do not dissolve, melt or weaken the two components. They form strong chemical bonds between the two substrates and provide a high strength alternative to other joining methods. Curing lamps are available in a variety of intensities from small inexpensive hobby type lamps to high intensity units for high speed production. Permabond will help you select the equipment best suited to your specific application. ► Cure on demand - allows proper alignment of components before bonding. ► Speed - increase production by simply adding more lamps to the line. ► Non-flammable and solvent-free - supports a safe and comfortable work environment. ► Single part product - No mixing required. ► Save energy and space - UV lamps require less electricity and space compared to ovens. ► Appearance - UV adhesives provide a pleasing finished appearance. ► Technical support- application specialists available for assistance with joint design, adhesive selection and production process environmental conditions

Permabond UV-Curable Adhesives Selection GuideThis table represents a selection of the complete range of Permabond UV-curable adhesives. For more detailed technical information and Technical Data Sheets, please visit permabond.com. To discuss your specific application requirements, please call Permabond. Our technical advisors will recommend the best adhesive from our existing range or assist in developing a custom formulation. Grade Cure speed: normally UV adhesives will cure in a matter of seconds. The variables affecting cure speed include the wavelength and intensity of the light source,...

Anaerobics Thread lockers, Thread sealants, FIP Gasketmakers, Retaining Compounds Cyanoacrylates Instant adhesives, for rapid bonding of metals, plastics, rubber, and more. Epoxies Two-part (ET), Single-part (ES), and Modified Technology (MT) grades are available. MS-Polymers Single-part, moisture-curing, flexible sealants Polyurethanes Two-part room temperature curing adhesives Toughened Acrylics Rapid curing, high strength structural adhesives UV Light Cured Adhesives For glass, plastic, and metal with dual cure options. PERMABOND.COM [email protected] The information given and the...