Engineering Adhesives Permabond structural acrylic adhesives are suitable for bonding a wide variety of materials. The rapid, room-temperature cure coupled with high strength and durability make these adhesives ideal for demanding applications where speed and ease of application of the adhesive is important.Permabond structural acrylic adhesives are suitable for a variety of applications. They are ideal for structural bonding of metals, composites, plastics, glass, wood and other materials. Permabond's structural acrylic adhesives have excellent durability. They resist tensile, peel, cleavage, and impact forces as well as resisting the stresses of differential thermal expansion found when bonding dissimilar materials. They are formulated with resistance in mind, so are suitable for applications that involve exposure to oils, greases, moisture and weathering. Permabond offers several types of structural acrylic adhesives: No-Mix Adhesive & Initiator (Surface Activated) • Initiator is applied to one of the bonding surfaces and the adhesive to the other. Suited to bonding tight fitting parts, this system provides a long open time and a short cure time. Bead on Bead Part A & Part B • A bead of one part is applied directly over a bead of the other part. No mixing is required. When the two components are pressed together, enough mixing will take place to cure the adhesive. Typical applications include : ►Magnet bonding (particularly for electric motors) ►Metal & glass furniture manufacturing ► Structural bonding - e.g. aluminium panels ► Rear view mirror attachment • Adhesive is supplied in convenient 1:1 cartridges for use with a dispensing gun. Adhesive is dispensed directly onto the substrate material via a static mixing nozzle. Single Component - No mixing required • These adhesives are simple to apply and cure with or without an activator (activator can be used to reduce cure times to seconds and to cure through larger gaps). ► Extrememly high strength bonds increase design possibilities. ► Excellent durability to impact, peel, shear, and thermal expansion increases part life. ► Room temperature cure eliminates ovens and other equipment. ► Rapid cure increases daily output to reduce production costs. ► Bond a wide variety of substrates to increase design freedom. ► Many non-flammable grades available. ► Technical support- application specialists available for assistance with joint design, adhesive selection and production proce

Permabond Structural Acrylic Adhesives Selection Guide This table represents a selection of the complete range of Permabond structural acrylic adhesives. For more detailed technical information and Technical Data Sheets, please visit permabond.com. To discuss your specific application requirements, please call Permabond. Our technical advisors will recommend the best adhesive from our existing range or assist in developing a custom formulation. Grade *Cure-speed is dependent on gap, substrates being bonded and temperature. For further information please contact Permabond for individual technical...

Anaerobics Thread lockers, Thread sealants, FIP Gasketmakers, Retaining Compounds Cyanoacrylates Instant adhesives, for rapid bonding of metals, plastics, rubber, and more. Epoxies Two-part (ET), Single-part (ES), and Modified Technology (MT) grades are available. MS-Polymers Single-part, moisture-curing, flexible sealants Polyurethanes Two-part room temperature curing adhesives Toughened Acrylics Rapid curing, high strength structural adhesives UV Light Cured Adhesives For glass, plastic, and metal with dual cure options. PERMABOND.COM [email protected] The information given and the...