Flexible Adhesives Permabond manufactures flexible adhesives to meet the growing demands of industrial engineers. Modified Epoxies and MS Polymers offer flexibility and each provides unique benefits. The flexibility combined with low shrinkage make them ideal for bonding thin substrates with no read-through or witness marks and for potting without exerting stress on sensitive components. Modified Epoxies (MT) Permabond Modified Epoxies are two component hybrid technology adhesives that cure at ambient temperature. Products are available in 10:1 and 2:1 dual cartridges for dispensing through static mix tips. The range includes fast-setting products as well as slow curing grades to suit production line requirements. Permabond MS Polymers are single component, hybrid technology adhesives that moisture cure at ambient temperature. The high elongation and flexible nature of these strong bonds meet the demands of stress from impact, peel and expansion that can occur when bonding dissimilar materials. They have excellent environmental resistance and remain very flexible. Permabond MS polymers and Modified Epoxies form strong bonds to: u Compsites u Metals u Wood u FRP u Glass u Plastics The high elongation and flexible nature of these strong bonds meet the demands of stress from impact, peel and expansion that can occur when bonding dissimilar materials. The have excellent environmental resistance and remain very flexible. Benefits of Permabond MS Polymers and Modified Epoxies include: u Paintable u Non-corrosive u Fast Tack Free Time u Adhesion to a Variety of Substrates u No primer needed u Weather Resistant - No Cracking or Splitting u Ease of Application - Use in Most Weather Conditions

Permabond Flexible Adhesives Comparison Chart This table represents a selection of the complete range of Permabond adhesives. For more detailed technical information and product Safety Data Sheets, visit permabond.com. To discuss your specific application requirements, please call Permabond and our technical advisors will recommend the best adhesive for you or discuss the development of a new grade or product modification to meet your technical requirements. For full technical information, please refer to the TDS (Technical Data Sheet)

Anaerobics Thread lockers, Thread sealants, FIP Gasketmakers, Retaining Compounds Cyanoacrylates Instant adhesives, for rapid bonding of metals, plastics, rubber, and more. Epoxies Two-part (ET), Single-part (ES), and Modified Technology (MT) grades are available. MS-Polymers Single-part, moisture-curing, flexible sealants Polyurethanes Two-part room temperature curing adhesives Toughened Acrylics Rapid curing, high strength structural adhesives UV Light Cured Adhesives For glass, plastic, and metal with dual cure options. PERMABOND.COM [email protected] The information given and the...