Anaerobics The Permabond range of anaerobic adhesives is formulated to provide superior performance benefits in applications with self-supporting or closely-mating metallic components such as retaining bearings, threadlocking, flange sealing, gasketing, and pipe sealing. How do Permabond anaerobic adhesives work? Permabond anaerobic adhesive formulations are designed to cure when air is absent and metal surfaces (both ferrous and non-ferrous) are present. The liquid adhesive fills imperfections in the metal surfaces and gaps between the mated parts. The adhesive then rapidly cures to an inert acrylic adhesive/sealant creating a solid 100% mechanical surface-to-surface contact and physical lock. Retaining Compounds: ► Enhanced torque resistance over mechanical joining. ► 5 times greater load carrying capacity than mechanical jointing methods. ► Greater design freedom through possibility of joining dissimilar materials. ► Protection against corrosion. ► Reduced machining tolerances in part design. ► 100% surface-to-surface contact, thus improving strength and vibration resistance Threadlockers: ► Fast cure speeds for quick pressure testing. ► Dismantleable and permanent threadlocking that increases project versatility. ► 100% leak-free seal, even with mis-threaded fittings. ► Protection against corrosion. ► Wicking sealants to penetrate tight fitting or pre-assembled parts. Thread Sealants ► PTFE based formulations for durable, long-term sealing. ► Inert cured material; resistant to acids, solvents and glycol based products. ► Multiple viscosities; to seal both fine and coarse threads. ► Fast cure speeds for quick pressure testing; instantly sealing to lOOOpsi (70bar) ► Dismantleable and permanent thread sealants that increase project versatility. ► 100% leak-free pipe sealing even with mis-threaded pipes. ► Final cure strength that exceeds that of most pipe materials. Gasket Materials - Form in Place Gaskets ► Fast cure and high strength that eliminates flange re-tightening. ► A full range of viscosities for various gap-filling requirements. ► Fast cure speeds for quick pressure testing ► High -temperature resistant products available. ► Dismantleable and permanent gasketing grades, expanding project versatility ► Excellent flexural and vibration tolerance with no loss in seal integrity. ► Liquid adhesive provides greater surface-to-surface contact than mechanical fasteners. ► Quick curing without air; accelerates assembly rates. ► Resistant to oils, solvents and other surface treatments. ► Available in permanent and removable formulations. ► Superior bond strength; often exceeds that of substrate material. ► Wide temperature range; from 55 to 230°C (-65 to 445°F) ► Gap fill capability from interference fits up to 0.5mm (0.02").

Anaerobics Thread lockers, Thread sealants, FIP Gasketmakers, Retaining Compounds Cyanoacrylates Instant adhesives, for rapid bonding of metals, plastics, rubber, and more. Epoxies Two-part (ET), Single-part (ES), and Modified Technology (MT) grades are available. MS-Polymers Single-part, moisture-curing, flexible sealants Polyurethanes Two-part room temperature curing adhesives Toughened Acrylics Rapid curing, high strength structural adhesives UV Light Cured Adhesives For glass, plastic, and metal with dual cure options. PERMABOND.COM [email protected] The information given and the...