Engineering Adhesives Permabond 2-part epoxy adhesives are suitable for bonding a wide variety of materials. Available with a range of different cure speeds tosuit, Permabond epoxies have been developed to offer a high standard of performance for demanding bonding applications.Substrates Permabond 2-part epoxy adhesives will bond most engineering materials. They form excellent structural bonds to a wide variety of materials including metals, composites, wood, and even some plastics. Material Selection The high strength durable bonds formed on a vast array of substrates increases the designer's ability to choose the best materials for the application. Durability Their excellent chemical and water resistance makes them suitable for harsh environmental conditions. These epoxies are an excellent choice for high strength structural bonding. Applications Epoxies are widely used in the marine, automotive, aerospace, appliance, general assembly and construction industries. Applications are diverse and include bonding handles onto tools, aerospace structures, kitchen countertops, motor housings and mounting brackets. Process These 1:1 mix epoxies can be easily dispensed with a static mixing nozzle. No measuring or hand mixing is needed. Heat curing is not needed as the adhesives will cure at room temperature. However, for faster cure than those stated on the chart on page 2, heat can be used to increase the speed of cure. Joint Design The high shear and peel strength of the bonds, coupled with the increased stress distribution of adhesives, greatly expands joint design possibilities. ► High peel strength increases design versatility ► 1:1 mix ratio of most Permabond 2-component epoxies reduces equipment costs ► Durability increases material choices ► Rapid cure increases production rates ► Room temperature cure reduces equipment & energy costs ► Solvent free - improves workplace safety ► Low odour - improves workplace environment

*Products may be subject to minimum order quantities and lab approval required for samples. **Heat cured Cure-speed varies depending on ambient temperature, the cure times quoted above were tested at 23°C. For further information please contact Permabond for individual technical and safety data sheets. This table represents a selection of the complete range of Permabond two-part epoxy adhesives. Contact Permabond for a product recommendation your technical requirements.

Anaerobics Thread lockers, Thread sealants, FIP Gasketmakers, Retaining Compounds Cyanoacrylates Instant adhesives, for rapid bonding of metals, plastics, rubber, and more. Epoxies Two-part (ET), Single-part (ES), and Modified Technology (MT) grades are available. MS-Polymers Single-part, moisture-curing, flexible sealants Polyurethanes Two-part room temperature curing adhesives Toughened Acrylics Rapid curing, high strength structural adhesives UV Light Cured Adhesives For glass, plastic, and metal with dual cure options. PERMABOND.COM [email protected] The information given and the...