Leak Detection/Location Systems PAL-AT" • LlQUIDWATCH" • FLUIDWATCH* Enviromental Specialty Products

PAL-AT detects and locates leaks for Data Centers, Jet Fuel Systems, Tank Farms, Clean Rooms and Other Applications

Why PAL-AT® ? Control the damage and you control costs. In most monitoring situations, just knowing that you have a liquid leak is not good enough. You need to know: Where is it? When did it occur? Where did it start? Is there more than one leak? You need accurate information and you need it now! The sooner you pinpoint the where and what, the sooner you can begin to control and minimize damage to your facility, personnel, the environment and to your balance sheet. With PAL-AT® you can have this type of information instantly. PAL-AT is a sophisticated micro-processor system with multi-sensing...

Leak Detection At Work PermAlert leak detection systems provide protection for the following applications: Wet Benches Dry Storage Pharmaceutical Manufacturing Process Control Rooms File Storage Areas Sprinkler System Monitoring Chemical Storage Areas Environmental Chambers Microfilm Storage Rooms Military Mothballing Facilities Cable Trays and Tunnels Microwave Relay Stations Museum Storage Radioactive Liquid Storage Landfill Leachate Piping Systems Hazardous Chemical Storage Mining Industry POP Sites Double-Wall Piping Buried Chilled/Hot Water Lines Buried Steam Lines Hospital Operating Rooms...

Centralized Operations with PALCOM ® Network Software PALCOM® software, (for Windows®), can centrally monitor up to 254 PAL-AT monitoring units. A computer is connected to the PAL-AT units, using either Ethernet, RS-232, RS-485 or phone modems. The software has the ability to continuously monitor the status and/or remotely operate each PAL-AT. The PALCOM archive feature keeps a record of all system events. These events can be reviewed or printed for troubleshooting or documentation for reports. The remote keypad feature allows the operator to view a PAL-AT display and operate the PAL-AT unit....

PAL-AT® Sensor Cable The PAL-AT sensing string can be made up of any combination of probes and sensor cables. Sensor cables and probes are designed to serve a wide variety of applications. With PAL-AT's sensor technology, the system is not subject to false alarms caused by dust or other non-liquid conductive materials that may come in contact with the cable or from casually stepping on the cable. Several sensor cables are capable of detecting and locating both water-based and hydrocarbon liquids and others will detect only hydrocarbons, ignoring water. In some applications, the sensor cable can...

PERMALERT Probes . PWS Probes will detect water-based liquids. PSTV and PTHL Probes are float switches, designed for installation in a 2" stand pipe on double-wall tanks. They allow monitoring of the interstitial space of a double-wall tank or high/low level of the product in the tank. Special materials are available for specific liquids for chemical compatability. PFS Probe is a float switch designed to monitor liquids in manholes, sumps, etc. It will detect water-based or hydrocarbon liquids. Special materials are available for specific liquids for chemical compatability. Probes monitor for...

LiquidWatch® Leak Detection Systems ProducT FeATures • Sensing of organic liquids (hydrocarbons and solvents) or water within seconds of contact Vapor and gases are ignored Remote monitoring capability with an RS-232 interface and relays UL, cUL Listed with Class l, Division 1, Groups C & D sensor circuits optional NEMA 4X Enclosure Up to 64 probes and 16 programmable alarm relays available specifications Part 1 - system 1.1 The Discrete Point Monitoring System (D.P. M.S.) shall consist of a monitoring unit, probe module, relay module and probes. The D.P. M.S. shall be capable of detecting liquids...

FluidWatch® Leak Detection Systems ProducT FeATures • Senses water based liquids within seconds of contact Sensitivity from several inches to several feet Durable sensor cable Available in sensor lengths: 10 ft to 100 ft Comes in a kit, complete with (if required) jumper cable, sensor cable, cable clips and cable tags specifications Part 1 - system 1.1 FluidWatch Leak Detection System shall consist of an electronic monitoring unit, coaxial water-sensing cable, interconnecting jumper cable, cable clamps and identification tags. All cable connectors shall be factory installed. The system supplier...

PAL-AT® Specification Guide The leak detection/location system shall consist of microprocessor based monitoring unit(s) capable of continuous monitoring of a sensor string for leaks/faults. The unit shall have a sensing range of (3,000 ft) [900m], (7,500 ft) [2300m] per cable. The alarm unit(s) shall operate on the principle of pulsed energy reflection and be capable of mapping the entire length of the sensor cable and storing the digitized system map in non-volatile memory. The alarm unit(s) shall provide continuous indications that the sensor cable is being monitored. After the detection of...