1. Catalogs
  2. Perkins Engines Inc
  3. Perkins Irrigation Engine Ratings Guide
video corpo

Perkins Irrigation Engine Ratings Guide

Perkins Irrigation Engine Ratings Guide
1 / 10 PagesView full catalog

Perkins Irrigation Engine Ratings Guide

Product catalog summary
General Data: The document outlines specifications for Perkins irrigation engines, noting that final weight and dimensions vary based on the final specification. These diesel engines have a capacity of up to 7.01 liters, with performance measured under specific ISO conditions.
Abbreviations: A list of abbreviations is included, such as ATAAC (Air to Air Aftercooled), hp (Horsepower), and EPA (Environmental Protection Agency).
Power Estimator: This section provides guidance on calculating power needs for irrigation systems, including steps to determine total dynamic pumping head, calculate power for water flow, and estimate engine power requirements, emphasizing efficiency and cost-effectiveness.
Industrial Power Units: Detailed specifications for various Perkins engine models, such as 404D-22, 404D-22T, and 1104D-44T, are provided, including technical details like cylinder number, bore and stroke, displacement, and aspiration type.
Emissions Regulations: The document confirms compliance with emissions standards like the 2008 EPA Tier 4 Interim and EU Stage IIIA for non-road mobile machinery.
Perkins Global Distributor Network: Mentions the global distribution network for Perkins engines, though specific details are not provided.
Engine Specifications and Performance: Detailed specifications for Perkins engine models, including the 1104D-E44T and 1206E-E70TTA, are provided. Key specifications cover cylinders, bore and stroke, displacement, aspiration type, cycle, combustion system, compression ratio, rotation direction, and cooling system. Engines comply with EU Stage IIIA/EPA Tier 3 and 2012 EPA Tier 4 Interim emissions requirements.
Performance Ratings: Performance data for each engine model includes speed (rpm), power output (kW and hp), and fuel consumption (l/hr and gal/hr). For example, the 1104D-E44T engine at 2200 rpm produces 90.3 kW (121.0 hp) with a fuel consumption of 25.0 l/hr (6.6 gal/hr).
Dimensions and Weight: Dimensions and dry weight for each engine model are listed, with final weight and dimensions depending on the completed specification. For instance, the 1204E-E44TA engine measures 1433 mm in length, 820 mm in width, and 1126 mm in height, with a dry weight of 650 kg.
Warranty and Service: Perkins offers a one-year warranty for constant speed engines and a two-year warranty for variable speed models, with additional Extended Service Contracts available. The company highlights the availability of expert product knowledge and genuine parts through its global distributor network.
Contact Information: Contact details for Perkins offices in Europe, Asia, and the Americas are provided, including addresses, telephone numbers, and fax numbers.
Additional Resources: Links to Perkins' website and distributor locator are included for further information.
See more

Catalog excerpts

Perkins Irrigation Engine Ratings Guide-1

THE HEART OF EVERY GREAT MACHINE

 Open the catalog to page 1
Perkins Irrigation Engine Ratings Guide-2

General Data Photos are for illustrative purposes only and may not reflect final specifications. Final weight and dimensions will depend on final specification. Factory-designed systems built at Perkins ISO 9000:2000 certified facilities. Diesel engines - up to 7.01 litre. All rating conditions are based on ISO/TR 14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in. Hg), with a vapor pressure of 1 kPa (0.295 in. Hg), and 25˚C (77˚F). Performance measured using fuel to specification EPA 2D 89.33096 with a density of 0.845-0.850 kg/L @ 15˚C (59˚F) and fuel...

 Open the catalog to page 2
Perkins Irrigation Engine Ratings Guide-3

Power Estimator Power Estimator For top irrigation system efficiency Centrifugal pump taking water from pond to open discharge This selection guide will help you identify your irrigation power needs and choose the right Perkins engine to meet those needs efficiently. High reliability and low cost of ownership make Perkins engine power your most attractive option. First, follow these 12 steps to calculate the flywheel power your irrigation system requires. Then match your results to the selection charts on the following pages to see which Perkins engine offers the best efficiency and economy....

 Open the catalog to page 3
Perkins Irrigation Engine Ratings Guide-4

Power Estimator Power Estimator Deep well pump delivering to sprinkler system Calculate power to deliver needed water flow 5. Flow rate required Will vary for crop, soil, terrain, and climate. To deliver 8.5 mm (1/3 in) per day to a quarter section [65 ha (160 acre)] field, estimate 63.5 Ls (1006 gpm). 6. Calculate water power requirement Power to pump required water, if pump and drive were 100% efficient. Flow Rate (5) x Total Dynamic Pumping Head (4) 102 Flow Rate (5) x Total Dynamic Pumping Head (4) 3,960 Preliminary Estimate Final Calculation For direct-driven centrifugal pump use 1.0. For...

 Open the catalog to page 4
Perkins Irrigation Engine Ratings Guide-5

Power Unit Power Unit General Data Fuel Consumption Irrigation Engine Ratings Guide Fuel Consumption Meets 2008 EPA (US) Tier 4 Interim, EU Stage IIIA (Europe) emissions requirements General Data Complies with EU Stage IIIA/EPA Tier 3 for non-road mobile machinery powered by variable speed engines (EPA 40 CFR Part 89 Tier 3) Irrigation Engine Ratings Guide

 Open the catalog to page 5
Perkins Irrigation Engine Ratings Guide-6

Power Unit Power Unit General Data General Data Final weight and dimensions will depend on completed specification. Final weight and dimensions will depend on completed specification. Fuel Consumption Fuel Consumption Irrigation Engine Ratings Guide Complies with EU Stage IIIA/EPA Tier 3 for non-road mobile machinery powered by variable speed engines (EPA 40 CFR Part 89 Tier 3) Complies with EU Stage IIIA/EPA Tier 3 for non-road mobile machinery powered by variable speed engines (EPA 40 CFR Part 89 Tier 3) Irrigation Engine Ratings Guide

 Open the catalog to page 6
Perkins Irrigation Engine Ratings Guide-7

Power Unit Final weight and dimensions will depend on completed specification Fuel Consumption Designed to meet 2012 EPA (US) Tier 4 Interim, EU Stage IIIB (Europe) and MLIT Step 4 (Japan) emissions requirements Irrigation Engine Ratings Guide Designed to meet 2012 EPA (US) Tier 4 Interim, EU Stage IIIB (Europe) and MLIT Step 4 (Japan) emissions requirements Irrigation Engine Ratings Guide

 Open the catalog to page 7
Perkins Irrigation Engine Ratings Guide-8

EPA & EU NON-ROAD EMISSIONS REGULATIONS* (1) If Particulate Matter met early, extension (2) Particulate Matter and NOx at the same ti 3 dB Reduction in Machine Noise Level Required, 350 ppm Sulphur Fuel Required European Non-road Wherever you are in the world you are always With highly trained Perkins distributors in thousands of communities in over 180 countries, you are never far away from expert product knowledge, genuine parts and a range of advanced diagnostic technology for keeping your engine in peak condition. Enjoy peace of mind with warranties and service We provide one-year warranties...

 Open the catalog to page 8
Perkins Irrigation Engine Ratings Guide-9

Irrigation Engine Ratings Guide

 Open the catalog to page 9
Perkins Irrigation Engine Ratings Guide-10

Asia Singapore Perkins Engines (Asia Pacific) Pte Ltd 14 Tractor Road Singapore 627973 Tel: +65 6828 7469 Fax: +65 6828 7414 China Perkins Industrial Power Systems-Shanghai Room 2103, Lei Shing International Plaza, 1319 West Yan’an Road, Shanghai 200050 China Tel: 86 21 22160704 Fax: 86 21 52136624 Americas North America Perkins Engines Inc N4 AC 6160 PO Box 610 Mossville, IL 61552-0610, USA 1-888-PERK-ENG Tel: +1 309 578 7364 Fax: +1 309 578 7329 South America Perkins Motores do Brasil Ltda Rua Alexandre Dumas, 1711 Ed. Birman 11 9o andar, Chácara Santo Antonio São Paulo / SP - Brasil Cep: 04717-004...

 Open the catalog to page 10
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.