PLASTIC LUMBER EXTRUSION LINE ECO FRIENDLY SUSTAINABLE CIRCULAR ECONOMY Plastic lumber is used today as a substitute for wood in several scenarios, including civil construction and urban furniture. Reducing landfill waste by reusing plastic materials to create more sustainable new products that will have many long-term benefits for the environment, reduces our overall carbon footprint Recycled plastic lumber is a perfect choice to solve the problems of the traditional wood, works with high-contaminated plastics without washing them reducing the maintenance costs to zero.

AUTOMATIC PLASTIC LUMBER EXTRUSION LINE AUTOMATIC PLASTIC LUMBER EXTRUSION LINE LINE ELEMENTS 1. Line control 2. Feeding 3. Extruder 4. Moulding group 5. Collecting table

AUTOMATIC PLASTIC LUMBER EXTRUSION LINE AUTOMATIC PLASTIC LUMBER EXTRUSION LINE LINE CONTROL Software that allows you to control the entire line synchronously and automatically, with the operator only intervening once in each cycle to remove the bars/load more raw material. MAIN FEATURES Production history Recipes Control every component of the line - Feeding (force feeding and dosers) - Extrusion (Temperature, speed degassing, pressure) - Mould Group position - Water temperature - Extraction

AUTOMATIC PLASTIC LUMBER EXTRUSION LINE FEEDING AND FORCE FEEDING AUTOMATIC PLASTIC LUMBER EXTRUSION LINE FEEDING SYSTEM Big bag system Worm Screw (with alert for lack of raw material) Force feeding (allows mixing LDPE film) Doser for colouring or fibres could be included Extruder with a capacity of more than 300 kg/h MAIN FEATURES Insulated panels that guarantee thermal high efficiency Powerful vacuum degassing Closed loop circuit of contaminated water reducing freshwater waste Very accurate temperature control

AUTOMATIC PLASTIC LUMBER EXTRUSION LINE AUTOMATIC PLASTIC LUMBER EXTRUSION LINE MOULDING GROUP Moulds holding group unit for 10 4-metre-long moulds. The complete cycle time corresponds approximately to 1 mould filling, 8 mould in cooling and 1 mould being extracted. Extraction system by pneumatic cylinder assisted by a haul-off for parallel positioning to the plasticizing unit. Moulding unit installed inside a stainless-steel cooling tank in a closed water circuit with controlled temperature to optimise cooling. TECHNICAL DETAILS: Maximum production: 300 kg/h Total installed power: 175 kW Operator...

FINAL PRODUCT EXTRACTION & COLLECTING TABLE The plastic lumber line is designed to produce round, square,and rectangular beams, from 0,1 to 4 metres (using the same mould). Dumping table pneumatically driven. Capable of collecting more than 10 pieces of 100×50 plastic lumber beams. The tops of the beams - round, square or rectangular - can have a straight, pointed or half-moon shaped finish. On the beams sides it is possible to make tongue-and-groove joints or slip resistant footpath planks.

Address Rua de Marrazes, lote 32 Zicofa 2415-807 Leiria Portugal Online [email protected] www.periplast.pt