The 2-component injection pump PSP 4/85 is an electric driven gear pump, which can be used with most 2component materials that require a mixture rate of 1:1. Due to the construction as gear pump the PSP 4/85 can deliver high pressures at a high flow rate without the disadvantages of piston pumps. The electric drive of the PSP 4/85 makes it easy to control the flow rate of the pump stage less and to work with it in areas where no compressed air is available. Because of her compact and modular construction the PSP 4/85 can be easily transported in heavy terrain. Along with the PSP 4/85 you can also order our media tanks with a capacity of 2x 50l which ensures a continuous workflow without the need of permanent refilling. Media tanks not included Application: The PSP 4/85 is priory used where high pressures und medium flow rates are needed for the injection of 2-Component Injection materials. It can be used for normal injection works as well for special applications like gravel bonding. Technical Data: Required power supply Max. operating pressure Connections Suction connection Max. electric drive power Pressure outlet Chamber volume of each gearpump Polyurethan Silicate resin ca. 8 l/min at max. 85 bar / 1232 psi Max. flow rate Dimensions Height Width Length Within the specified technical features and performance data, engineering and design of our products are subject to change. To all products and services our general terms and conditions, incl. Product liability, apply exclusively. (Perforator, Technical Data Sheet PSP,4/85 Rev. 01/ 2012)