On many job sites you have to fulfill the requirement of a complete documentation of the injectionwork. For that purpose we have build the PERFORATOR Flow Measurement Unit 65/160. This is a two channel measurement unit which records flow and pressure of both components of the injection It also gives you the possibility to shutdown your pump if a certain pressure or flow was achieved (additional accessories required). The recorded values get stored in the internal memory of the device and can be read out onto a USB flash device as an Excel File. Application: You place the PERFORATOR PFMU 65/160 between your injection pump and your mixing unit, suitable HD- hoses. After that you have the possibility to only display the measured values or to record them on the device. Within the specified technical features and performance data, engineering and design of our products are subject to change. To all products and services our general terms and conditions, incl. Product liability, apply exclusively. (Perforator, Technical Data Sheet PERFORATOR GmbH Bel dem Gerlchte • 37445 walkenrled • Germany • Fon --49 (0)55 25 / 201-0 ■ Fax --49 (0)5525 < 2 01-48 eMail: lnfodperfofaior.de • Internet: www.perforator.de