• Power Supply: 400V / 50Hz
• Max. Operating Pressure: 140 bar / 2030 psi
• Suction Connection: RD 32 x 1/8"
• Max. Electric Drive Power: 2x 1.5kW
• Pressure Outlet: 2x Steck-O DN 10
• Chamber Volume of Each Gear Pump: 3 cm³ / 0.18 inch³
• Weight: Approximately 205 kg
• Max. Operating Temperature: 60°C
• Compatible Liquids: Polyurethane, Silicate resin
• Max. Flow Rate: Approximately 9 l/min at max. 140 bar / 2030 psi
• Dimensions: Height 1400 mm, Width 700 mm, Length 1460 mm

The IZP 3/140 is a 2-component injection pump driven by an electric gear pump, suitable for most 2-component materials. It offers high pressure and flow rates without the drawbacks of piston pumps. The integration with Perforator's flow measurement technology allows for precise injection and documentation. The electric power supply enables operation in areas lacking sufficient compressed air.

Primarily used where high pressures and medium flow rates are required for injecting 2-component materials. The integrated flow measurement unit facilitates control and recording of the injection process.

Includes two 50-liter material containers. Product design and engineering are subject to change within specified technical features and performance data. General terms and conditions, including product liability, apply exclusively.