TTR-04.1 tripod turnstile
6Pages

ENTRANCE AND ACCESS CONTROL PRODUCTS TTD-03.1 Electromechanical Box Tripod Turnstile for indoor application Technical Specification The TTD-03.1 turnstile is designed to maintain access control to industrial and office facilities, banks, shops, transport terminals, etc. High throughput capacity allows its use for heavy pedestrian traffic. The turnstile features six operating modes set from the remote control panel and is intended for bi-directional single or multiple passages. Passage can be controlled in either direction. The TTD-03.1 consists of a turnstile housing with a built in control logic board (CLB), a top cover with LED directional indicators, a remote control panel and a set of barrier arms. The turnstile housing is constructed as a sheet metal framework on a frame base with two outer panels. The top part of the housing contains a rotation mechanism with three barrier arms fixed into a hub and a damper, a self-centering mechanism, a control mechanism with optical arm rotation sensors and a locking device, a mechanical release lock. The top cover is made radio transparent to allow concealed mounting of readers inside the turnstile housing. The operation zone stands out with a different colour; the read range is up to 80 mm. Status and Direction Light Indication: Two LED directional indicators with bright pictograms are located on the top cover as standard: Green Arrow indicates that the turnstile is unlocked to permit a passage and shows the direction of authorised passage; Red Cross indicates that passage is not allowed and shows that the turnstile remains in locked status. Control over Turnstile: Control over the turnstile can be carried out in either pulse or potential control mode. In both modes the control signal is applied to the CLB connector block contacts. This alternative ensures correct operation of the TTD-03.1 in any existing access control system, allowing use of controllers with outputs supporting the potential control mode. The turnstile can be operated: - from the remote control panel or a wireless remote control (in the pulse control mode); - from access control system (ACS) via a controller (in either pulse or potential control mode).

The TTD-03.1 is a normally closed unit (N/C), i.e. the turnstile remains locked until it receives a valid authorisation signal or is unlocked with a mechanical release key. If integrated into a fire alarm system, the turnstile can also be automatically unlocked by fire alarm signal. Control Mechanism Components: Operation of the turnstiles is controlled by an electro-mechanical assembly located under the top cover. The control mechanism consists of the following parts: a self-centering mechanism to ensure automatic complete rotation of the barrier arms to the home position regardless of the...

Timeout Facility: (timed re-lock) The turnstile has a preset timeout period (the passage waiting time) when the turnstile is unlocked to allow a passage in the permitted direction. A timed auto re-lock if the passage has not begun (if not rotated) over this period is a standard feature. The passage waiting time in the pulse control mode is 5 seconds regardless of the control signal duration. In the potential mode the passage waiting time is equal to the control signal duration. Power Supply: The turnstile is powered from a regulated power supply unit 12V DC @1A (ordered separately). If the...

Technical Specications: Operational voltage Throughput rate (in the single passage mode) Overall dimensions (HxLxW): - with barrier arms - without barrier arms Passageway width Operating temperature range The turnstile in the original package should be transported only in closed freight containers or other closed type cargo transport units. The turnstile is shipped in two separate boxes. During storage and transportation the boxes containing the housing CANNOT be stacked on each other, while the smaller boxes with the top covers can be stacked no more than 6 layers high. It is recommended...

TTD-03.1 Site Preparation Overall dimensions Overall view ACS reader operation zone 1 — top cover; 2 — outer panel; 3 — framework; 4 — frame base; 5 — LED directional indicator; 6 — barrier arm; 7 — mechanical release lock; 8 — mechanical release key; 9 — turnstile top cover lock; 10 —turnstile top cover key; 11 — turnstile power supply; 12 — remote control panel / wireless remote control/ ACS controller; 13 — control cable; 14 — power cable; 15 — AC power cable; 16 — hub; 17 — hub cover; 18 — М4х25 screw; 19 — М8х30 bolt. Optimal arrangement of passageway Floor anchor position and cable...

Standard Delivery Set: turnstile housing built-in control logic board CLB turnstile top cover (specified at time of order, 2 colours available) with 2 LED directional indicators barrier arms* (specified at time of order) cable remote control panel mechanical release lock with 2 keys packaging * Types of Barrier Arms: standard barrier arms anti-panic folding arms Available options: Regulated power supply 12V DC@1А Uninterrupted power supply 12V DC@2А and battery backup 7Ah For complete design solutions: The turnstiles can be supplied with matching railings enabling to make the entrance...