Universal Input/Output (HART) FB7204B3 ■ 4-channel ■ Installation in suitable enclosures in Zone 1 ■ Module can be exchanged under voltage (hot swap) ■ Analog input, digital input, analog output, digital output ■ HART communication via field bus or service bus ■ Simulation mode for service operations (forcing) ■ Line fault detection (LFD): one LED per channel Release date: 2025-03-03 Date of issue: 2025-03-03 Filename: 223085_eng.pdf C€<E>Function The device is a configurable universal module. Each channel can operate in the following modes: - As an analog input (AI) it feeds 2-wire transmitters. - As an analog output (AO) it can drive proportional valves, I/P converters, or local indicators. - As a digital input (DI) it reads dry contacts. - As a digital output (DO) it can drive solenoids, sounders, or LED. A combination of analog and digital I/O is possible. Channel LEDs indicate the status of each channel. White LEDs indicate whether AI, AO, DI, DO are selected. The intrinsically safe signals are galvanically isolated from the bus and the power supply. ConnectionTechnical Data Slots Rated voltage Ur 12 V DC , only in connection with the power supplies FB92** Refer to "General Notes Relating to Pepperl+Fuchs Product Information". Pepperl+Fuchs Group www.pepperl-fuchs.com [email protected] [email protected]

Release date: 2025-03-03 Date of issue: 2025-03-03 Filename: 223085_eng.pdf Refer to "General Notes Relating to Pepperl+Fuchs Product Information". Pepperl+Fuchs Group www.pepperl-fuchs.com

Universal Input/Output (HART) Technical Data Power LED (P) green: supply Diagnostic LED (I) red: module fault , red flashing: communication error , white: fixed parameter set (parameters from com unit are ignored) , white flashing: requests parameters from com unit Status LED (1-4) red: line fault (lead breakage or short circuit) , yellow: state of digital I/O (0/1) Directive conformity Electromagnetic compatibility Directive 2014/30/EU Electromagnetic compatibility Degree of protection Environmental test Shock resistance Vibration resistance Damaging gas Relative humidity Ambient conditions...

Universal Input/Output (HART) Technical Data International approvals ATEX approval Presafe 19 ATEX 14057U IECEx approval IECEx certificate IECEx PRE 19.0012U General information System information The module has to be mounted in appropriate backplanes and housings (FB92**) in Zone 1,2, 21,22 or outside hazardous areas (gas or dust). Here, observe the corresponding EC-type examination certificate. Supplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information...

Universal Input/Output (HART) Front view Power LED green Status LED red/yellow per channel Configuration LEDs white Socket for removable plug blue (accessory) Release date: 2025-03-03 Date of issue: 2025-03-03 Filename: 223085_eng.pdf Refer to "General Notes Relating to Pepperl+Fuchs Product Information". www.pepperl-fuchs.com [email protected] [email protected] [email protected] 5