HART Transmitter Power Supply, Input IsolatorFB3205B3 ■ 4-channel ■ Installation in suitable enclosures in Zone 1 ■ Module can be exchanged under voltage (hot swap) ■ Power supply for 2-wire transmitters with 4 mA ... 20 mA ■ Input from active signals of 4-wire transmitters ■ HART communication via field bus or service bus ■ Simulation mode for service operations (forcing) ■ Line fault detection (LFD) The transmitter power supply feeds 2- and 3-wire transmitters. Active signals from separately powered field devices and 4-wire transmitters can be connected. Open and short-circuit line faults are detected. The intrinsically safe inputs are galvanically isolated from the bus and the power supply. Release date: 2025-02-25 Date of issue: 2025-02-25 Filename: 276318_eng.pdf Technical Data Slots Occupied slots Supply Connection Rated voltage Power dissipation Power consumption Internal bus Connection Interface Ur 12 V DC , only in connection with the power supplies FB92** 1.5 W 2.7 W manufacturer-specific bus to standard com unit Refer to "General Notes Relating to Pepperl+Fuchs Product Information". Pepperl+Fuchs Group www.pepperl-fuchs.com [email protected] [email protected]

HART Transmitter Power Supply, Input Isolator Technical Data Analog input Number of channels Suitable field devices Field device pressure converter flow converter level converter Temperature Converter Field device interface Connection 2-wire transmitter (HART):Supply circuit: channel I 1+, 2-, channel II 5+, 6-, channel III 9+, 10-, channel IV 13+, 14-3-wire transmitter:Supply circuit: channel I 1+, 4-, channel II 5+, 8-, channel III 9+, 12-, channel IV 13+, 16-Measurement loop: channel I 3+, 4-, channel II 7+, 8-, channel III 11+, 12-, channel IV 15+, 16-4-wire transmitter (powered externally):Measurement...

HART Transmitter Power Supply, Input Isolator Technical Data International approvals ATEX approval Presafe 19 ATEX 14056U Release date: 2025-02-25 Date of issue: 2025-02-25 Filename: 276318_eng.pdf IECEx approval IECEx certificate IECEx PRE 19.0011U General information System information The module has to be mounted in appropriate backplanes and housings (FB92**) in Zone 1,2, 21,22 or outside hazardous areas (gas or dust). Here, observe the corresponding EC-type examination certificate. Supplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity,...

HART Transmitter Power Supply, Input Isolator Assembly Front view Sockets for removable plugs blue (accessory) Release date: 2025-02-25 Date of issue: 2025-02-25 Filename: 276318_eng.pdf Refer to "General Notes Relating to Pepperl+Fuchs Product Information". www.pepperl-fuchs.com [email protected] [email protected] [email protected] 4