Travel switch WL Series Travel switch ► Application WL series travel switch,is applicable for Control circuit of AC50Hz,Rated AC voltage up to 380V,DC voltage up to 220V,as control of motion mechanism, motion direction or speed transformation. This production conforms to standard of GB14048.5,IEC60947-5-1. 2.1 Altitude: lower than 2000m. 2.2 Ambient temperature: no higher than +40oC,and no lower than -5oC, and day average temperature shall no more than +35oC. 2.3 Humidity: Relative humidity shall not excced 50% at the Max temperature,and higher humidity could be accepted at lower temperature. The condensation must be taken care which is caused by temperature change. 2.4 Pollution level: III type 3.2 Conventional heating current Ith:5A 3.3 Rated voltage and rated current see Tablel: 3.4 Power frequency withstand voltage:1890V,without flashover or breakdown phenonmenon 3.5 Insulation resistance:no less than 100M 3.7 Mechanical life:5million, Electrical life:500 thousand www.peopleelectric.com [email protected]

3.9 Motion performence parameter,see Table2 Operation mode Operation Reset torce(N) force(N) Roller rotating arm Adjustable roller rotating rod Adjustable rotating rod 2 wheels rotating rod Direct pressure plunger type Drect-pressure purger horizontal roler Direct-pressure plunger vertical roller Universal type spring wheel Overall and mounting dimension Fig4 WLD3 Notice Please note the Model No..quantity and special requirements in the order.