GENERAL CATALOGUE
520Pages

GENERAL CATALOGUE Edition 2023 www.pentax-pumps.it

Where there's water there's Pentax PENTAX s.p.a. Viale dell’Industria, 1 37040 Veronella (VR) - Italia Tel. +39 0442 489500 Fax +39 0442 489510 com@pentax-pumps.it

HISTORY For many years Pentax has held a large share of the world market for motorized pumps. The sales department is constantly working to better serve existing customers and to open up new markets. This is possible thanks to the wide range of products available which allows to cover most of the applications in the pump field. Special attention is also paid to market surveys, so that any new requirements can be immediately transferred to the research and development department: the best way to properly develop and forecast future scenarios. 1989 Pentax is the result of a strategy designed...

VALUES Reliability Choosing Pentax means choosing safety at every stage Where there is control, there is reliability: the basis for success Impeccable delivery time Pentax studies each case thoroughly, identifies the best solution and then takes action with security The best service: a wide range of Pentax products, one for every need OFFICIAL JOURNAL OF THE EUROPEAN UNION Regulation UE 547/2012 ANNEX II «The benchmark for most efficient water pumps is MEI ≥ 0,70». «The efficiency of a pump with a trimmed impeller is usually lower than that of a pump with the full impeller diameter. The...

THREADED CENTRIFUGAL CENTRIFUGAL FLANGED

MULTISTAGE HORIZONTAL MULTISTAGE VERTICAL ULTRA SV/SL/SLX ULTRA SLG/SLXG ULTRA HS/HX

DEEPWELL BOREHOLE DEEPWELL BOREHOLE MOTORS 4MPE/6MPE

SWIMMING POOL

DOMESTIC FILTER INDUSTRIAL LINE

ACCESSORIES 503 ELECTRONIC FLOW CONTROL VARIABLE SPEED DRIVE PROTECTION/CONTROL PANEL PRESSURE SWITCHES PRESSURE GAUGES

FLEXIBLE HOSES FLOAT SWITCHES CABLES JOINTS LEVEL PROBES GENERAL SALES CONDITIONS

Range of peripheral and liquid ring type positive displacement pumps; they are characterized by the high ratio between the performances offered and the power required. Applications: • Small domestic installations • Boiler feeding • For washing • Pressurization of industrial plants • Small autoclaves • Transfer of l

PERIPHERAL PUMPS

Peripheral positive displacement pump with front suction (PM) and side suction (PM A) for small household systems and simple industrial applications; characterised by a considerable ratio between performance and required output. Construction features Pump body cast iron, bronze (45BR) 3~ 230/400V-50Hz 2 Poles induction motor cast iron, cast iron or Motor bracket bronze (45BR) 1~ 230V-50Hz (with thermal protection) Impeller brass Mechanical seal ceramic-graphite-NBR Motor shaft stainless steel AISI 416 Liquid temperature 0 - 90 °C max 6 bar (45) Operating pressure max 8 bar (65, 80) max 9...

Characteristic curve Modello - Model: Data - Date:

Peripheral positive displacement pump with side suction for small household systems and simple industrial applications; characterised by a considerable ratio between performance and required output; frontal brass insert avoiding the risk of blockage. Construction features Pump body cast iron and brass Motor bracket cast iron 2 Poles induction motor Impeller brass 1~ 230V-50Hz (with thermal protection) Mechanical seal ceramic-graphite-NBR Motor shaft stainless steel AISI 416 Liquid temperature 0 - 90 °C Operating pressure max 8 bar LOTS TRUCK PALLET N° pumps (cm) CONTAINER PALLET N° pumps (cm)

Characteristic curve Modello - Model: Data - Date:

Volumetric pump with liquid ring impeller that gives considerable suction power to the pump. Particularly suitable for liquid transfer (including volatile liquids). The model has a frontal brass closing thus avoiding the risk of blockage. Construction features Pump body cast iron and brass Motor bracket cast iron 2 Poles induction motor Impeller brass 1~ 230V-50Hz (with thermal protection) Mechanical seal ceramic-graphite-NBR Motor shaft stainless steel AISI 416 Liquid temperature 0 - 90 °C Operating pressure max 8 bar LOTS TRUCK PALLET N° pumps (cm) 85×110×170 CONTAINER PALLET N° pumps...

Characteristic curve Modello - Model: Data - Date:

Wide range of single and multistage self-priming pumps, characterized by the fact of being able to handle liquids in the presence of dissolved gases. Applications: • Water supply • Pressurization • Liquid transfer • Irrigation and tank emptying • Small automatic systems of pressure incre

SELF-PRIMING PUMPS Stainless steel 60

Self-priming centrifugal pump for water supplies (even if mixed with gas) in small household systems, connected to autoclave tanks, for transferring liquids and emptying tanks; also used for gardening. Construction features Pump body cast iron Motor bracket Impeller aluminum (50N÷140) cast iron (150÷300) Noryl®, brass, steel AISI 304 for CAM 100N÷140 Mechanical seal ceramic-graphite-NBR Motor shaft stainless steel AISI 416 Liquid temperature 0 - 50 °C max 6 bar (50N÷75N) Operating pressure max 7 bar (100N÷140) max 8 bar (150÷300) Motor 3~ 230/400V-50Hz 2 Poles induction motor 1~ 230V-50Hz...

Characteristic curve Modello - Model: Data - Date: CAMT 50N CAMT 75N CAMT 100N CAMT 120 CAMT 140

Characteristic curve Modello - Model: Data - Date: CAMT 150 CAMT 200 CAMT 300

(Garden version) Portable electropumps complete with handle, cable with plug and switch. The performances depend on adopted pump type. TYPE

Self-priming centrifugal pump for domestic applications such as domestic systems where air is mixed with water. Recommended in combination with pressure set for water transfer, rainwater harvesting and garden irrigation systems. Construction features Pump body stainless steel AISI 304 2 Poles induction motor Motor bracket aluminum Noryl®, steel AISI 304 for Impeller INOX 100N÷140 1~ 230V-50Hz (with thermal protection) Mechanical seal ceramic-graphite-NBR Motor shaft stainless steel AISI 416 Liquid temperature 0 - 50 °C Operating pressure max 8 bar motor bracket motor pump type TYPE INOX...