STEAM TRAP WITH BIMETALLIC COLUMN DESCRIPTION: Thermostatic steam trap with bimetallic column, inbuilt strainer and stainless steel internals. Best suited for steam tracers, header drip legs, heating coils and various process & heating applications. FEATURES: Stainless steel protected bimetal plates resist corrosion. Excellent resistance to water hammer. Sub-cooling temperature is adjustable. Tight shut off. No steam loss. Long lasting. Modulating discharge. Excellent air venting capability. Suitable for both saturated & superheated steam applications. CONNECTIONS: Screwed (NPT/BSPT/BSP) Socket Weld/Flanged *End connection flanges of ASTM A105 forged carbon steel are weld on. INSTALLATION: Trap should be installed in a horizontal plane with cover on the top, and below the drain point. Full port isolation valves should be installed upstream & downstream of the LIMITING CONDITIONS: PMA: Max. allowable pressure TMA: Max. allowable temperature PMO: Max. operating pressure TMO: Max. operating temperature Cold hydro test pressure trap. Sufficient upstream piping capacity for accumulation 450 psig 800 °F 315 psig 425 psig 760 °F of condensate should be provided to prevent condensate backing up into the equipment - 1mt. minimum. IMPORTANT: For new pipelines, ensure that the lines are properly flushed, prior to fitting the traps, to avoid strainer choke up. All Dimensions in inches. weights in lbs

Controller Assy. BIMETAL/SS STAINLESS STEEL Valve Stem STAINLESS STEEL Strainer Screen CAF / Graphite with SS304 Reinforced DIMENSIONS: Nominal in inches D WEIGHTS: (approx.) SIZE AVAILABLE SPARES: Controller Assly., Gaskets, Strainer Screen. ORDERING INFORMATION: Refer 'How to Order' page Local regulations may restrict the use of this product below the conditions quoted. Limiting conditions refer to standard connections only. In the interest of development and improvement of the product, we reserve the right to change the specifications without prior notice. All Dimensions in inches. weights...