Catalogs >
PENN Engineering >
StickScrew® System

StickScrew® System
4Pages

Catalog excerpts

SMALL SCREW INSERTION SYSTEM

The STICKSCREW® system offers manufacturers an extremely fast, accurate and efficient method of small screw insertion. The StickShooter® driver is designed to accommodate interchangeable nose assemblies allowing quick changeover from one hex size to another. This simple, low cost system combines a lightweight driver and “sticks” of up to 130 per 12” serially connected hex head screws. Simply insert the stick in the driver, advance to the second screw, squeeze the trigger, place the tip of the rotating screw into the hole and the screw is driven home, twisting off cleanly when precise...

Open the catalog to page 2

THE STICKSCREW® SYSTEM CUSTOM SCREWS (If standard part will not meet your requirements) To order a custom screw, simply choose the product variable from each of the 7 categories listed below. Our technical staff will be happy to assist you to select the proper size and type of screw to meet your requirements. Thread Type Thread Size Thread Forming Thread Cutting Head Height Screw Length increment) (Any 400 Series Stainless Steel 300 Series Stainless Steel Finish Zinc Black Oxide (2) Chromate finish is available on brass screws to prevent tarnishing. (3) Standard on steel. (4) Standard for...

Open the catalog to page 3

THE STICKSCREW® SYSTEM OPERATION 2) Drive - Squeeze the trigger to start the driver. Place the tip of the rotating screw into the hole and the screw is driven home, twisting off cleanly when precise seating torque is reached. The next screw is automatically indexed into the driving position. Go to StickScrew portion of our website to see video of tool operation. 1) Load - Insert the stick into the back of the driver and advance to the second screw. TOOLS Our StickShooter™ air tools are lightweight, ergonomic, and quiet. These tools provide years of reliable operation. If needed, service and...

Open the catalog to page 4