Catalogs >
PENN Engineering >
Quick Product Locator

Quick Product Locator
6Pages

Catalog excerpts

QUICK PRODUCT LOCATOR

Self-clinching fasteners are pressed into sheet metal panels as this as .016” / 0.4 mm. Broaching fasteners are pressed into PC board or other plastic materials as thin as .060” / 1.53 mm. Surface mounted fasteners on tape and reel are soldered to a PC board in the same way as other surface mount components. Flare mounted fasteners can be installed into almost any rigid type of panel. Weld nuts are designed specially to be welded into place. (Products are listed alphabetically by type. Refer to matching color square for mounting style) FHL, FHLS Bulletin FH Low-displacement head studs can...

Open the catalog to page 2

Bulletin MPF Self-clinching microPEM® pins that can be installed into sheets as thin as 0.5 mm. Bulletin PF Small, compact, and low-profile self-clinching captive panel screws designed for limited access areas. Bulletins MSI & MPF microPEM symmetrical designed thru-threaded inserts for plastics for use in straight or tapered holes. Bulletin PF Small, compact, and low-profile flaring captive panel screws designed for limited access areas. Bulletin MPF Self-clinching microPEM® standoffs that can be installed into sheets as thin as .016” / 0.4 mm. PFC2, PFS2 Bulletin PF Spring-loaded panel...

Open the catalog to page 3

The spinning clinch bolt with jacking feature installs captive in panel and still spins freely. The spinning clinch bolt with axial float utilizes self retracting spring. SpotFast® self-clinching fasteners create a permanent flush joining of two sheets of metal. Thru-hole threaded and unthreaded standoffs installed with their heads flush with one surface of the Grounding standoffs for clinching into metal chassis with "gripping teeth" at opposite end to firmly contact Specially hardened self-clinching nuts for installation into stainless steel sheets. SpotFast® self-clinching fasteners...

Open the catalog to page 4

WN, WNS Bulletin WN Self-locating projection weld nuts. The engineered projections prevent burn-outs in thin sheets. PEM® FASTENER IDENTIFICATION MARKS To help you identify genuine PEM® brand fasteners, most are marked by one of our trademarks. Genuine PEM fasteners can only be purchased from one of our authorized worldwide distributors. For a complete listing of these distributors, check our web site: www.pemnet.com. PEM® Stamp (Registered Trademark) Types CLS, CLSS, H, HN, HNL, PSHP, S, SFN, SL, SMPS, SP, SS, WN PEM® Dimple (Registered Trademark) Types CFHA, CFHC, CHA, CHC, FH, FH4, FHA,...

Open the catalog to page 5

PEM® FASTENER PROTOTYPE KIT The PEM prototype kit contains a wide variety of PEM fasteners for your prototype needs. The kit contains over 1,000 different nuts, studs, standoffs, and panel fasteners of various types and sizes, so you can choose the one which will best suit your specific design requirements. The kit is available with unified or metric parts. Price U.S. $99.00 (subject to change without notice). SELF-CLINCHING FASTENER INSTALLATION DOS AND DO NTS Do provide mounting hole of specified size for each fastener. Do install fastener into punch side of sheet. Do make certain that...

Open the catalog to page 6