Catalogs >
PENN Engineering >
PEMSERTER Series P3? Press and Micro-Mate® Hand Tool

PEMSERTER Series P3? Press and Micro-Mate® Hand Tool
2Pages

Catalog excerpts

PEMSERTER Series P3? Press and Micro-Mate® Hand Tool - 1

PNEUMATIC HAND PRESS The PEMSERTER® Series P3 fastener installation press is a portable power hand tool weighing only 4.6 kg. /10 lbs. that can develop a With the PEMSERTER Series P3 press, you can easily install self- clinching nuts and studs in metric or unified sizes. The metric press kit contains punches and anvils to install nuts (S, CLS, and CLA) ranging from M2 thru M4 thread sizes and studs (FH, FHS, and FHA up to 12mm in length) ranging from M2.5 thru M4 thread sizes. The unified press kit contains punches and anvils to install nuts and studs up to 0.5" in length ranging from #2-56 thru #8-32 thread sizes. Specifications subject to change without notice. Check our website for the most current version of this bulletin. Pressure System Type Pneumatic Throat Depth Yoke Depth ► Pneumatic power for consistency and simple operation. Requires shop air only. ► Trigger controlled safety. ► Snap-in tooling changeover. ► Press includes metric or unified ► Can be bench-mounted. Back side of yoke has two predrilled and tapped holes for bench mounting. Mounting bracket hardware ► One-year parts warranty. North America: Danboro, PA USA • E-mail: info@pemnet.com • Tel: +1-215-766-8853 • Fax: +1-215-766-0143 • 800-237-4736 (USA Only) Europe: Galway, Ireland • E-mail: europe@pemnet.com • Tel: +353-91-751714 • Fax: +353-91-753541 Asia/Pacific: Singapore • E-mail: singapore@pemnet.com • Tel: +65-6-745-0660 • Fax: +65-6-745-2400 Shanghai, China • E-mail: china@pemnet.com • Tel: +86-21 -5868-3688 • Fax: +86-21 -5868-3988 Visit our PEMNET™ Resource Center at www.pemnet.com

Open the catalog to page 1

PEMSERTER Series P3? Press and Micro-Mate® Hand Tool - 2

The PEMSERTER® MICRO-MATE® press is a versatile hand tool weighing only 1.25 kg / 2 3/4 lbs. that can develop a squeezing force of 1,134 kg / 2,500 lbs. The press kit contains one hand tool, one flat punch, seven punches and dies, one punch adapter bushing, one edge-depth guide, five fastener anvils and a storage case. The metric kit installs nut sizes M2 to M5, while the unified kit installs nut sizes #2-56 to HAND TOOL ► Equipped with punches and dies to punch fastener mounting holes in metal sheets. ► Changes to a flat punch and recessed anvil to easily install metric or unified...

Open the catalog to page 2