Catalog excerpts
WITH DUAL BOWL AND QX™ TURRET TOOL SYSTEM The dual bowl expansion cart option and the QX™ Turret Tool system for use on the PEMSERTER® Series 2000® automatic fastener-installation press system provide a quick and efficient method to quickly change between anvil tools while handling the work piece to install different fasteners. With the use of the second bowl on the expansion cart and the QX™ Turret Tool System, you can install up to four different fasteners; two in automatic feed mode, and two in manual feed mode. A third bowl on a second expansion cart can also be added for appropriate applications. Contact a PEMSERTER® sales representative to review your application. our position color-coded, two positions are autoF feed, remaining two manual load with color-coded fastener tray. ouch screen setup for all four stations including T selection of installation force and number of fasteners to be installed per work-piece. nly good installs are counted. Once set-up, the O job will not allow you to install a fastener our of sequence. Operator is notified by visual and/or audible signal to rotate turret to next location or that the work-piece is complete per the job set-up.
Open the catalog to page 1
The Series 2000 press utilizes a programmable logic controller and a menu-driven touch screen operator interface system, in eleven available languages. Touch screens allow for quick-run- set-up, easy operator training, and precise fastener installation setups. They also allow the operator to instantly adjust installation variables such as dwell time and installation force and automatically alert and direct the operator to any safety or system faults for quick diagnosis. The Series 2000 press has a unique patented LightStream® Operator Safety System. It is a wireless, fail-safe system which...
Open the catalog to page 2All PENN Engineering catalogs and technical brochures
-
SO12 Pages
-
LN24 Pages
-
FH32 Pages
-
FE6 Pages
-
CL™16 Pages
-
CH 12176 Pages
-
B 9164 Pages
-
ALA 12174 Pages
-
Index 1188 Pages
-
SF 11158 Pages
-
SK 8146 Pages
-
SO 121412 Pages
-
SS 41624 Pages
-
SSA 9136 Pages
-
TD 4156 Pages
-
VM 7156 Pages
-
WN 10154 Pages
-
RA 2158 Pages
-
PF 41544 Pages
-
MPF 11616 Pages
-
LN 41420 Pages
-
K 101520 Pages
-
FH 11632 Pages
-
FE 3156 Pages
-
F 12144 Pages
-
CL 81416 Pages
-
B 8144 Pages
-
CH 11156 Pages
-
ALA 3144 Pages
-
Index 9146 Pages
-
Self-Clinching Studs/ Pins32 Pages
-
Self Locking Fasteners20 Pages
-
microPEM® Fasteners16 Pages
-
Right Angle Clinch Fasteners8 Pages
-
Snap-Top®6 Pages
-
SMTPF 10152 Pages
-
PEMSERTER® Presses16 Pages
-
StickScrew® System4 Pages
-
Automotive Components8 Pages
-
Threaded Inserts for Plastics20 Pages
-
Access Hardware44 Pages
-
Self-Clinching Nuts12 Pages
-
Quick Product Locator6 Pages
-
self-locking fasteners20 Pages
-
PEM® Heavy Duty Clinch Studs2 Pages
-
Self-Clinching Fastener Handbook16 Pages
-
Blu-Coat? Thread Mask1 Pages
-
PEM microPEM® TackPin? Fasteners12 Pages
-
Heat Sink Mounting System4 Pages
-
Turret Tool System2 Pages
-
PEMSERTER Series 4 Press2 Pages
-
In Die Feeding System4 Pages
-
PEMSERTER Series 2000 Press2 Pages
-
PEMSERTER Series 3000 Press2 Pages
-
Atlas Type AEKC1 Pages
-
Atlas Condensed Catalog4 Pages
-
Self-Clinching Standoffs12 Pages
-
SpotFast® Fasteners8 Pages
-
Flush Self-Clinching4 Pages
-
PEMSERTER Catalog16 Pages
-
StickScrew® System4 Pages
-
Self-Clinching Cable Tie Mounts6 Pages
-
SpotFast® Fasteners8 Pages
-
Spinning Clinch Bolt4 Pages
Archived catalogs
-
Product Guide12 Pages