Catalogs >
PENN Engineering >
PEMSERTER® Presses

PEMSERTER® Presses
16Pages

Catalog excerpts

FASTENER INSTALLATION EQUIPMENT AND SYSTEMS

FASTENER INSTALLATION EQUIPMENT AND SYSTEMS Dedicated fastener-installation equipment, pioneered by PennEngineering, can deliver a competitive edge. No matter how demanding a job, our systems and expertise provide time-proven solutions. We rolled out our first PEMSERTER® fastener-insertion press in 1967, which introduced fabricators and OEMs to an entirely new method for installing self-clinching fasteners. The benefits of installation speed, quality, and cost reduction quickly became apparent and remain true to this day. As we have grown, our PEMSERTER brand has stood to identify a diverse...

Open the catalog to page 2

FASTENER INSTALLATION EQUIPMENT AND SYSTEMS PEMSERTER® SERIES 3000™ AUTOMATIC INSERTION PRESS The PEMSERTER® Series 3000™ automatic feed fastener-installation press can install self-clinching fasteners up to 30% faster than traditional systems to deliver comparable productivity gains. This press provides 71.2 kN / 8 tons of force and a 61cm / 24” throat depth and has full servo electromechanical actuation technology to provide significant improvement in operating consistency, improved reliability, increased efficiencies and minimized maintenance. Total elimination of hydraulic fluids...

Open the catalog to page 3

FASTENER INSTALLATION EQUIPMENT AND SYSTEMS PEMSERTER® SERIES 3000™ AUTOMATIC INSERTION PRESS SPECIFICATIONS Throat Depth 6 to 7 BAR / 90 to 100 PSI 6mm / 1/4” dia. minimum line flow Servo Electromechanical Actuator Electric Requirements Featuring Patented Full Servo Electromechanical Actuation Technology ENERGY USAGE ESTIMATE COMPARISON TO A HYDRAULIC PRESS The PS 3000 press running at 40 strokes per minute can produce 4,992,000 cycles at a cost of approximately US $39.00 per year. Comparably, a typical 8 ton hydraulic press running at 15 strokes per minute can produce 1,404,000 cycles at...

Open the catalog to page 4

FASTENER INSTALLATION EQUIPMENT AND SYSTEMS PEMSERTER® SERIES 3000MB™ AUTOMATIC MULTI-BOWL INSERTION PRESS The multi-bowl insertion option consists of a single PEMSERTER® Series 3000® automatic fastener-installation press equipped with the QX™ Turret Tool system and up to three expansion bowls. With this set-up, a single operator can install up to four different types and/or sizes of nuts, studs, and standoffs in automatic feed mode with no tooling changes. This four bowl system is more cost-effective, more reliable, easier to operate, and provides more manufacturing flexibility than a...

Open the catalog to page 5

FASTENER INSTALLATION EQUIPMENT AND SYSTEMS PEMSERTER® SERIES 2000® AUTOMATIC INSERTION PRESS The PEMSERTER® Series 2000® press has established itself as the productivity leader in the world of fastener installation. This press has 71.2 kN / 8 tons of force and a 61cm / 24” throat depth. The high speed hydra-pneumatic actuating system delivers insertion speed that cannot be met by other insertion systems and the optional auto-feed capabilities insure that the fasteners are positioned quickly and accurately. The Series 2000 press utilizes a programmable logic controller and a menu-driven...

Open the catalog to page 6

FASTENER INSTALLATION EQUIPMENT AND SYSTEMS PEMSERTER® SERIES 2000® AUTOMATIC INSERTION PRESS SPECIFICATIONS Pressure System Type 6 to 7 BAR / 90 to 100 PSI 12mm / 1/2” dia. minimum line flow Throat Depth Electric Requirements FEATURES AND BENEFITS • Job search and recall mode allows operators to reference 300 stored jobs and return to previous jobs quickly and easily. • PLC readily accommodates custom programs. • Cast aluminum bowl with epoxy coating handles larger parts and performs quietly. • Wide feeder track increases fastener-feeding rates. • Large touch-screen and graphics contribute...

Open the catalog to page 7

FASTENER INSTALLATION EQUIPMENT AND SYSTEMS PEMSERTER® SERIES 2000® PRESS WITH DUAL BOWL EXPANSION CART The dual bowl expansion cart option and the QX™ Turret Tool system for use on the PEMSERTER® Series 2000® automatic fastener-installation press system provide a quick and efficient method to quickly change between anvil tools while handling the work piece to install different fasteners. With the use of the second bowl on the expansion cart and the QX™ Turret Tool System, you can install up to four different fasteners; two in automatic feed mode, and two in manual feed mode. A third bowl...

Open the catalog to page 8

FASTENER INSTALLATION EQUIPMENT AND SYSTEMS PEMSERTER® SERIES 4® PRESS WITH AUTOMATIC FEED The PEMSERTER® Series 4® press with automatic feed provides 6 tons of force and has a 45.7cm / 18” throat depth which provides clearance for a variety of chassis configurations. It is designed to install self-clinching nuts, studs, and standoffs in sizes M2.5 to M6 / #2-56 to 1/4”. Pneumatic power for speed, consistency, and simple operation. Uses same tooling components as the Series 2000® and Series 3000™ presses. Automatically installs nuts, studs, and standoffs from M2.5 to M6 / #2-56 to 1/4”....

Open the catalog to page 9

FASTENER INSTALLATION EQUIPMENT AND SYSTEMS PEMSERTER® SERIES 4® PNEUMATIC PRESS Now with new Optical Sensor Indicator (OSI) Feature The PEMSERTER® Series 4® press is totally pneumatic providing short cycle time for increased productivity and 53.4 kN / 6 tons of force and a 45.7 cm / 18” throat depth which provides clearance for a variety of chassis configurations. It is designed to install self-clinching fasteners in size M2 / #0 thru M10 / 3/8” in steel, and sizes up to M12 / 1/2” in aluminum panels or circuit boards. NEW OSI Feature Laser Pointer Stroke Counter Standard Features Lockable...

Open the catalog to page 10

FASTENER INSTALLATION EQUIPMENT AND SYSTEMS OPTIONAL ANVIL HOLDERS FOR SERIES 4® PRESS Optional anvil holders and tooling can be easily installed on all new and existing PEMSERTER® Series 4® press. When a workpiece flange and fastener location prohibits the use of standard tooling, the use of top or bottom mount, reverse flange anvil holders will often solve the installation problem. Bottom Mount Reverse Flange Anvil Holder. Top Mount Reverse Flange Anvil Holder includes punch and anvil. OPTIONAL QX4™ MANUAL TOOLING FOR SERIES 4® PRESS The PEMSERTER® QX4™ manual Turret Tool System provides...

Open the catalog to page 11