Catalogs >
PENN Engineering >
PEM Type SGPC? Swaging Collar Studs

PEM Type SGPC? Swaging Collar Studs
2Pages

Catalog excerpts

PEM® Type SGPC™ Swaging Collar Studs PEM Type SGPC swaging collar studs can install into most panel material, provide strong torque-out resistance and are suitable for close centerline-to-edge situations. These studs can also accommodate multiple panels as long as the total thickness does not exceed the maximum sheet thickness. * Features and Benefits • Installs into sheets as thin as .024” / 0.6 mm. • Can be installed into dissimilar materials. • Can be installed into most panel materials, including stainless steel. • Allows for close centerline-to-edge distance. • Corrosion resistant. • RoHS compliant. NEW! Look for the PEM “Dimple” trademark. (1) See installation data for tooling requirements. Contact Technical Support (techsupport@pemnet.com) for other thicknesses. (2) Threads are gageable to within 2 pitches on the “S” Max. dimension. A class 3B/5H maximum material commercial nut shall pass up to the “S” Max. dimension. * When using the fastener to attach more than one sheet or panel, the stud may seem slightly loose after installation. This is a normal condition in some applications and will not effect the stud’s performance. Part Number Designation SGPC – 632 – 8 Material and Finish Specifications Fastener Material: 300 series stainless steel Finish: Passivated and/or tested per ASTM A380 For Use In Any Sheet Hardness. Thread Code Length Code

Open the catalog to page 1

PEM® Type SGPC™Swagi aging Collar Studs 1. Prepare properly sized mounting hole in sheet. 2. Insert fastener through mounting hole (preferably the punch side) as 3. With installation punch and anvil surfaces parallel, apply squeezing force until the punch pushes over the protruding knurls of the stud. (1) The values reported are averages when all installation specifications and procedures are followed. Variations in mounting hole size, sheet material and installation procedure will affect this data. Performance testing of this product in your application is recommended. We will be happy to...

Open the catalog to page 2