Catalog excerpts
PEM Type MSO4 Self-clinching microPEM® Standoffs ® PEM Type MSO4 self-clinching microPEM standoffs are used to space internal components and provide strong, permanent, and reusable load-bearing threads in metal sheets as thin as .016” / 0.4mm. Smallest standoff size includes 2mm length with M1 threads. Other metric and unified sizes are also offered. NEW! Features and Benefits • Become integral parts of an assembly by clinching permanently in place. • Will not loosen or fall out. • Can be installed into stainless steel sheets. • Can be installed automatically. • RoHS compliant. All dimensions are in inches. Thread Size Type Stainless Steel Thread Code Length Code Hole Size In Sheet +.002 -.000 Hole Size In Sheet +0.05 Min. Dist. Hole C/ To Edge All dimensions are in millimeters. Type Stainless Steel Thread Code Thread Size Length Code Min. Dist. Hole C/ To Edge * For installation into thinner sheets, contact Tech Support at techsupport@pemnet.com. MATERIAL AND FINISH SPECIFICATIONS PART NUMBER DESIGNATION Fastener Material: 400 series stainless steel Finish: Passivated and/or tested per ASTM A380 Material Code Thread Code Length Code For Use In Sheet Hardness: HRB 88 / HB 176 or less (4) (4) HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.
Open the catalog to page 1
Self-clinching microPEM® Standoffs Prepare properly sized mounting hole in sheet. Do not perform any secondary operations such as Insert fastener through mounting hole (preferably the punch side) and into anvil as shown in drawing. With punch and anvil surfaces parallel, apply only enough squeezing force to embed the standoff's head flush in the sheet. Recommended Installation Anvil (1) The values reported are averages when all installation specifications and procedures are followed. Variations in mounting hole size, sheet material and installation procedure will affect results. Performance...
Open the catalog to page 2All PENN Engineering catalogs and technical brochures
-
SO12 Pages
-
LN24 Pages
-
FH32 Pages
-
FE6 Pages
-
CL™16 Pages
-
CH 12176 Pages
-
B 9164 Pages
-
ALA 12174 Pages
-
Index 1188 Pages
-
SF 11158 Pages
-
SK 8146 Pages
-
SO 121412 Pages
-
SS 41624 Pages
-
SSA 9136 Pages
-
TD 4156 Pages
-
VM 7156 Pages
-
WN 10154 Pages
-
RA 2158 Pages
-
PF 41544 Pages
-
MPF 11616 Pages
-
LN 41420 Pages
-
K 101520 Pages
-
FH 11632 Pages
-
FE 3156 Pages
-
F 12144 Pages
-
CL 81416 Pages
-
B 8144 Pages
-
CH 11156 Pages
-
ALA 3144 Pages
-
Index 9146 Pages
-
Self-Clinching Studs/ Pins32 Pages
-
Self Locking Fasteners20 Pages
-
microPEM® Fasteners16 Pages
-
Right Angle Clinch Fasteners8 Pages
-
Snap-Top®6 Pages
-
SMTPF 10152 Pages
-
PEMSERTER® Presses16 Pages
-
StickScrew® System4 Pages
-
Automotive Components8 Pages
-
Threaded Inserts for Plastics20 Pages
-
Access Hardware44 Pages
-
Self-Clinching Nuts12 Pages
-
Quick Product Locator6 Pages
-
self-locking fasteners20 Pages
-
PEM® Heavy Duty Clinch Studs2 Pages
-
Self-Clinching Fastener Handbook16 Pages
-
Blu-Coat? Thread Mask1 Pages
-
PEM microPEM® TackPin? Fasteners12 Pages
-
Heat Sink Mounting System4 Pages
-
Turret Tool System2 Pages
-
PEMSERTER Series 4 Press2 Pages
-
In Die Feeding System4 Pages
-
PEMSERTER Series 2000 Press2 Pages
-
PEMSERTER Series 3000 Press2 Pages
-
Atlas Type AEKC1 Pages
-
Atlas Condensed Catalog4 Pages
-
Self-Clinching Standoffs12 Pages
-
SpotFast® Fasteners8 Pages
-
Flush Self-Clinching4 Pages
-
PEMSERTER Catalog16 Pages
-
StickScrew® System4 Pages
-
Self-Clinching Cable Tie Mounts6 Pages
-
SpotFast® Fasteners8 Pages
-
Spinning Clinch Bolt4 Pages
Archived catalogs
-
Product Guide12 Pages