Catalogs >
PENN Engineering >
PEM microPEM® TackPin? Fasteners

PEM microPEM® TackPin? Fasteners
12Pages

Catalog excerpts

Ideal for today’s compact electronics

IDEAL FOR TODAY’S COMPACT ELECTRONICS • Laptops • Notebooks/Ultrabook™ Devices • Tablets/eReaders • Cell/Smart Phones • Gaming/Hand Held Devices Ultrabook™ is a trademark of Intel Corporation • Threads as small as M1. • Pin diameters as small as 1mm. • Standoff lengths as short as .040” / 1mm. • Clinches into sheets as thin as .016” / 0.4mm. • Attach sheets as thin as .008” / 0.2mm. Parts for smaller and/or thinner applications have been designed. Please contact us for more information. TYPE MPP™ SELF-CLINCHING microPEM® PINS Ideal for micro positioning and alignment applications - PAGE 3...

Open the catalog to page 2

PEM® TYPE MPP™ SELF-CLINCHING microPEM® PINS • Satisfy demanding micro positioning and alignment applications. • Head mounts flush into panels as thin as 0.5mm / .02”. • Chamfered end makes mating hole alignment easy. • Can be installed into stainless steel sheets. • Excellent corrosion resistance. • Can be installed automatically. Look for the PEM “Dimple” registered trademark PART NUMBER DESIGNATION MPP – 1MM – 2 Type & Material Type Pin Pin Diameter Stainless Diameter P Steel Code ±0.038mm Length Code Length Code “L” ± 0.15mm (Length Code in millimeters) Hole Size Min. Min. In Sheet D H...

Open the catalog to page 3

PEM® TYPE TA™ TackPin™ microPEM® FASTENERS • Advantages over micro screws: eliminates costly tapping, cross threading, torque control, vibration backout and installation time. • Interference fit minimizes hole tolerance issues. • Tapered tip assists location. • Low-profile head provides space savings. • Can be installed automatically. See below for more information. Comparison of TackPin™ fastener to screw installation. With TackPin™ Fastener With Screw Low-profile head Interference fit eliminates hole tolerance Patented. Look for the PEM “Dimple” registered trademark PART NUMBER...

Open the catalog to page 4

CUSTOM microPEM® TackPin™ FASTENER SOLUTIONS Countersunk TackPin™ Fastener • Installs into a countersunk hole, replacing countersunk screws. • Offers flush or near flush appearance. TackScrew™ Fastener (currently in development) • Simple, press-in installation. • Twist out (unscrew) if removal is required. Can be reinstalled by threading back into hole. • Approximately 30 lbs. pullout and 5 in-oz. • Available with Torx Plus®, Mortorq® Super or other drives as required. Patent pending. MagTack™/PlasTack™ Fasteners (currently in development) • Simple, press-in installation. • Secure panels to...

Open the catalog to page 5

PEM® TYPE SMTSO™ SURFACE MOUNT microPEM® FASTENERS • • • • Hex shaped barrel provides optimal size/performance. Provided on tape and reel. Reduces board handling. Can be installed automatically. Double Notch (PEM Registered Trademark) Metric -1 length not marked PART NUMBER DESIGNATION SMTSO 080 – 2 – ET Plated through hole not required. Thread Code Length Code Finish Code Min. Size ØH Hole ØD Thread Thread Length Sheet A C E H L In Sheet Min. Solder Size Type Code Code Thickness Max. Max. Ref. Nom. ±.003 +.003 –.000 Pad .060-80 2 .062 SMTSO 080 .020 .019 .095 .144 .125 .098 .165 (1) 4 .125...

Open the catalog to page 6

microPEM® SCREWS • Smallest thread size: M0.8. • Shortest length: 1mm / .039”. • Fastener material: steel, stainless steel nd aluminum. a • Driver types: Torx®/Torx Plus®/Mortorq® Super Drive System/cross-recess/internal hex • Head styles: flat head/pan head/socket-head/washer-head/Mortorq® Super-thin Wafer Head. • Special features: Locking patch, REMFORM®, TAPTITE 2000® and FASTITE 2000®. • Platings: zinc, nickel, black nickel and black oxide. MORTORQ® SUPER SPIRAL DRIVE SYSTEM Drive wall Removal wall • Exceptionally shallow, super high-strength recess • Extremely high torque capability...

Open the catalog to page 7

MATERIAL AND FINISH SPECIFICATIONS Fastener Materials Carbon Type Steel Standard Finishes Optional Finishes Age Hardened 400 Passivated A286 Series and/or Electro-Plated Bright Tin Stainless Stainless Aluminum Tested Per ASTM B 545, Class A Plain Steel Steel ASTM A380 With Clear Preservative Coating Finish Part Number Codes For Finishes Electro-Plated Matte Tin ASTM B 545, Class A With Clear Preservative Coating, Annealed (1) HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell. INSTALLATION PUNCH Recommended Installation Anvil 1. Prepare properly sized mounting hole in sheet. Do not...

Open the catalog to page 8

INSTALLATION TYPE SMTSO Polyimide patch applied here for vacuum pick up. Number of parts per reel/pitch (mm) for each size Solder paste applied to pad on PCB. Solder fastener in place using standard surface mount techniques. Packaged on 13” recyclable reels. Tape width is 16mm. Supplied with polyimide patch for vacuum pick up. Reels conform to EIA-481. TYPE TA 1. Prepare properly sized mounting hole in sheet and base panel. Base panel mounting hole can be through or blind. 2. Place sheet and base panel in proper position. 3. Place fastener through hole in sheet and into mounting hole of...

Open the catalog to page 9

PERFORMANCE DATA(1) TYPE MPP Type Test Sheet Thickness TYPE MSO4 Max. Rec. Test Sheet Material Tightening .017” 300 Series Stainless Steel Torque For Mating Screw Installation Pushout Torque-out Pull-thru (in. lbs.) (lbs.) (lbs.) (in. lbs.) (2) (lbs.) (2) Thread Code Thread Code Max. Rec. Test Sheet Material Tightening 0.43 mm 300 Series Stainless Steel Torque For Mating Screw Installation Pushout Torque-out Pull-thru (N•m) (kN) (N) (N•m) (2) (N) (2) TYPE TA 5052-H34 Aluminum Type Installation Pushout N lbs. N lbs. TA-10-025 TA-10-050 SMTSO TESTING CONDITIONS Oven High Temp Board Finish...

Open the catalog to page 10