Concealed Head Self-Clinching Studs and Standoffs
6Pages

Add to favorites

{{requestButtons}}

Catalog excerpts

Threads Fastener Materials Finish For Use In Sheet Hardness (3) External Internal, Passivated Type ANSI B1.1 2A / ANSI B1.1 2B / 2024-T4 300 Series No Finish and/or HRB 70 / HRB 50 / ANSI / ASME ANSI / ASME Aluminum Stainless Steel tested per HB 125 HB 82 B1.13M, 6g B1.13M, 6H ASTM A380 or Less or Less >

Open the catalog to page 5

Types CFHA, CFHC, CHC, CHAConcealed-head studsTypes CSOS, CSSConcealed-head standoffs 1. Mill a blind hole to the correct minimum depth. Fasteners may also be installed into through holes. 2. Place fastener into anvil hole. 3. Place the sheet over the shank of the fastener. > PUNCH PUNCH 4. With punch and anvil surfaces parallel, apply squeezing force until flange is flush with mounting sheet. *End mills available from PennEngineering. See chart below. L + .250/6.35 mmL + .250Ԕ/6.35 mm > ANVIL ANVIL DD > All dimensions are in inches. (+.003 .000) All dimensions are in millimeters. (+0.08)...

Open the catalog to page 6

All PENN Engineering catalogs and technical brochures

1. 

   SO

   12 Pages

2. 

   LN

   24 Pages

3. 

   FH

   32 Pages

4. 

   FE

   6 Pages

5. 

   CL™

   16 Pages

6. 

   CH 1217

   6 Pages

7. 

   B 916

   4 Pages

8. 

   ALA 1217

   4 Pages

9. 

   Index 118

   8 Pages

10. 

    SF 1115

    8 Pages

11. 

    SK 814

    6 Pages

12. 

    SO 1214

    12 Pages

13. 

    SS 416

    24 Pages

14. 

    SSA 913

    6 Pages

15. 

    TD 415

    6 Pages

16. 

    VM 715

    6 Pages

17. 

    WN 1015

    4 Pages

18. 

    RA 215

    8 Pages

19. 

    PF 415

    44 Pages

20. 

    MPF 116

    16 Pages

21. 

    LN 414

    20 Pages

22. 

    K 1015

    20 Pages

23. 

    FH 116

    32 Pages

24. 

    FE 315

    6 Pages

25. 

    F 1214

    4 Pages

26. 

    CL 814

    16 Pages

27. 

    B 814

    4 Pages

28. 

    CH 1115

    6 Pages

29. 

    ALA 314

    4 Pages

30. 

    Index 914

    6 Pages

31. 

    Floating Self-Clinching Fasteners

    4 Pages

32. 

    Self-Clinching Studs/ Pins

    32 Pages

33. 

    Self Locking Fasteners

    20 Pages

34. 

    microPEM® Fasteners

    16 Pages

35. 

    Right Angle Clinch Fasteners

    8 Pages

36. 

    Keyhole® Self-Clinching Standoffs

    6 Pages

37. 

    Snap-Top®

    6 Pages

38. 

    PEMSERTER Series 2000 Press with Dual Bowl and QX? Turret Tool System

    2 Pages

39. 

    SMTPF 1015

    2 Pages

40. 

    PEMSERTER® Presses

    16 Pages

41. 

    StickScrew® System

    4 Pages

42. 

    Atlas Brand Blind Threaded Inserts

    12 Pages

43. 

    PEM® Six-Lobe Heavy Duty Clinch Studs

    2 Pages

44. 

    Automotive Components

    8 Pages

45. 

    Threaded Inserts for Plastics

    20 Pages

46. 

    Access Hardware

    44 Pages

47. 

    Fasteners for Use in or with PC Boards

    20 Pages

48. 

    Miniature Self-Clinching Fasteners

    6 Pages

49. 

    Self-Clinching Nuts

    12 Pages

50. 

    Quick Product Locator

    6 Pages

51. 

    PFE® Type SFN® Spinning Flare Nut

    2 Pages

52. 

    BLIND SELF-CLINCHING FASTENER

    4 Pages

53. 

    self-locking fasteners

    20 Pages

54. 

    Electrical Resistance of Type HFHB Studs Installed In Copper

    1 Pages

55. 

    PEM® Heavy Duty Clinch Studs

    2 Pages

56. 

    Self-Clinching Fastener Handbook

    16 Pages

57. 

    Blu-Coat? Thread Mask

    1 Pages

58. 

    AdvancedTCA® Faceplate Fastening

    1 Pages

59. 

    Machinery Directive 2006/42/EC

    1 Pages

60. 

    Self-Piercing, Self-Clinching Tooling

    2 Pages

61. 

    PEM Type MPP? Self-Clinching Micro Pins

    2 Pages

62. 

    PEM Type MSO4? Self-Clinching Micro Standoffs

    2 Pages

63. 

    PEM Type SCBR? Spinning Clinch Bolts with Self-Retracting Feature

    2 Pages

64. 

    PEM Type SGPC? Swaging Collar Studs

    2 Pages

65. 

    PEM microPEM® TackPin? Fasteners

    12 Pages

66. 

    ReelFast® microPEM® Surface Mount Nuts/Standoffs

    12 Pages

67. 

    Heat Sink Mounting System

    4 Pages

68. 

    Turret Tool System

    2 Pages

69. 

    Fastener Length Monitoring Device

    2 Pages

70. 

    PEMSERTER Series 4 Press Automatic Feed

    2 Pages

71. 

    PEMSERTER Series 4 Press

    2 Pages

72. 

    In Die Feeding System

    4 Pages

73. 

    PEMSERTER Series P3? Press and Micro-Mate® Hand Tool

    2 Pages

74. 

    PEMSERTER Series 2000 Press

    2 Pages

75. 

    PEMSERTER Series 3000MB Automatic Multi-Bowl Press

    1 Pages

76. 

    PEMSERTER Series 3000 Press

    2 Pages

77. 

    PEMSERTER Series 2000XT Press

    2 Pages

78. 

    Atlas Type AEKC

    1 Pages

79. 

    Atlas Elastite? Nut With Washer

    1 Pages

80. 

    Atlas Type AEK Monel® Inserts

    1 Pages

81. 

    Atlas FM? Full Metric Blind Threaded Inserts

    12 Pages

82. 

    Atlas Condensed Catalog

    4 Pages

83. 

    Self-Clinching Cable Tie Mounts

    6 Pages

84. 

    Fasteners For Use In Stainless Steel Sheets

    16 Pages

85. 

    Self-Clinching Standoffs

    12 Pages

86. 

    SpotFast® Fasteners

    8 Pages

87. 

    Flush Self-Clinching

    4 Pages

88. 

    PEMSERTER Catalog

    16 Pages

89. 

    StickScrew® System

    4 Pages

90. 

    Self-Locating Projection Weld Nuts

    4 Pages

91. 

    Self-Clinching Cable Tie Mounts

    6 Pages

92. 

    SpotFast® Fasteners

    8 Pages

93. 

    Spinning Clinch Bolt

    4 Pages

94. 

    Blind Self-Clinching Fasteners

    4 Pages

95. 

    Self-Locking, Self-Clinching Fasteners

    6 Pages

Archived catalogs

1. 

   Product Guide

   12 Pages