Panel mount Stainless steel mount SPECIFICATIONS Wiring Sense system Minimum bridge resistance Number of load cells Sensitivity A/D Conversion Speed Internal Resolution A/D Converter type Display Resolution Display Step Decimal Comma Full Scale Range Excitation voltage Non Linearity Offset Drift Span Drift Digital Filters Overall Filter Calibration Methods Measurement Functions Memory Allocation Real-Time Clock Full Wheatstone bridge with passive connections (6-wire system). Passive sense system 43.75 Ohm @ 5V exc.(certified at 87,5 Ohms) 1 channel 1 - 8 Load cells 350 Ohm @ 5V exc. 1 - 16 Load cells 1100 Ohm @ 5V exc. 0.1 – 0.5 µV minimum voltage for verification scale Certified with 0.4 µV per part / 10000 parts 1600 measurements per second 24 Bits (16,777,216 parts) Sigma-Delta, ratio metric, isolated from digital 100,000 divisions max. x1, x2, x5, x10,x 20 x50, x100, x200. Selectable between any digits of the display value -2.5 mV to +11.25 mV ( -0.5mV/V to +2.25mV/V) 5 VDC < 0.005 % of reading < +/- 2 ppm/°C < +/- 2 ppm/°C High performance digital filters 1-10 Hz 0 to -50 dB Dead load and Span with up to 8 point linearization, Millivolt calibration G - CAL (Gravity correction) Automatic zero tracking, motion detection, zero, tare, preset tare, net mode, peak hold, valley hold, bar graphs multi range, multi interval Calibration data Flash, dynamic data in SRAM with battery backup. Standard with NiMh battery backup. PENKO Engineering B.V. ■Tel +31 (0)318 525630 ■Fax +031 (0)318 529715 ■[email protected] Web ■www.penko.com ■Copyright © 2010 ETC. All Rights Reserved. All product information and specifications subject to change. 7600L1084-EN-R2

PENKO STANDARD DI & DO 8 Digital Inputs 8 Digital Outputs (level cont.) OPTIONAL I/O 1 Analog Output 8 DI, optical isolated, 1 common, 18-28 VDC, PNP or NPN. Input 1 normal or counter input up to 8 kHz. 8 DO isolated PhotoMOS outputs, 2 common. max 36 VDC or AC, 0.5A Nominal, 1 A Surge (thermal fuse 0.5A), PNP or NPN. ELECTRICAL AC Power Supply 100 – 240 V AC 50/60Hz, 20 W max. CE only or DC power Supply 10.8V to 31.2V DC, 20 W max This product is intended to be supplied by a Class 2 or Limited power source, rated 10.8-31.2 Vdc, 0,65A@24Vdc STANDARD COMMUNICATION PORTS RS 232 Printer, ASCII,...

PENKO TOUCH SCREEN Display type Touch screen Display size Display material High resolution TFT LCD 640 x 480 pixels, 256 colors, High brightness 500 cd/m2. High contrast 350:1 Completely menu driven with graphical user interface Selectable 1, 2, 3, 5, 10 or 25 updates/s 0, -6, -12, -18, -24, -30, -36, -42, and -50 dB Selectable in any range of the display value Selectable in any range of the display value Zero, Net, No Motion 6 digits with leading zero suppression, selectable height = 18mm or 9 mm. Operate, configure and calibrate via four interfaces 1 - Front panel, (Touch screen) 2 - RS 232...

Panel mount version Panel mount housing Material housing Front machined aluminum, Dimensions front: W x H x D Dimensions housing: W x H x D Dimensions panel cut out Weight approx. . Mounting clips Rubber seal Built in cabinet If build in a cabinet (Front) extruded aluminum, black powder coating black anodized. 260 x 191 x 5 mm 220 x 150 x 48 mm 224 x 154 mm 1700 g. 2 mounting clips O-ring of mosrubber IP 45 IP 65 PENKO Engineering B.V. ■Tel +31 (0)318 525630 ■Fax +031 (0)318 529715 ■[email protected] Web ■www.penko.com ■Copyright © 2010 ETC. All Rights Reserved. All product information and specifications...

Stainless steel version Stainless steel mount housing Material housing Dimensions front: W x H x D Dimensions housing: W x H x D Weight approx. Protection Stainless steel 240 x 180 x 70 mm 280 x 200 x 70 mm. (including nuts and bracket) 2300 g IP 65 PENKO Engineering B.V. ■Tel +31 (0)318 525630 ■Fax +031 (0)318 529715 ■[email protected] Web ■www.penko.com ■Copyright © 2010 ETC. All Rights Reserved. All product information and specifications subject to change. 7600L1084-EN-R2