The Leading Experts In Weighing & Dosing The type PC6 is a stainless steel single point load cell with complete hermetic sealing. It is a perfect fit for use in harsh industrial environments and wash down applications. ■ Bench and floor scales, conveyor scales, check weighers, packaging machines and industrial process control ■ Wide range of capacities from 10 kg to 200 kg ■ Stainless steel construction ■ Environmental Protection IP68 with complete hermetic sealing ■ Maximum platform size up to 600 x 600 mm ■ High input resistance ■ Integral mounting spacer ■ NTEP approval to 5000 intervals, Class III ■ ATEX hazardous area approval for Zone ■ FM hazardous area approval acked Weight vailable Accessories Compatible range of electronics The load cell is provided with a shielded, 6 conductor cable (AWG 26) or with a shielded, 4 conductor cable (AWG 24). Cable jacket polyurethane. The shield is floating or connected to the load cell body + Sense (blue; 6-wire only) - Sense (brown; 6-wire only) - Excitation (black) Shield (yellow)

Load cell PC6: 10kg-200kg Technical Data The limits for Non-Linearity, Hysteresis, and TCRO are typical values. The sum of Non-linearity, Hysteresis and TCRO meets the requirements according to OIML R60 with pi_c=0.7. Mounting bolts M6 8.8; torque 10 Nm. Torque value assumes oiled threads. * Unified thread 1/4-20 UNC is available. PENKO Engineering B.V. | Schutterweg 35, 6718 XC Ede | The Netherlands | Tel 0031 (0)318 525630 | Fax 0031 (0)318 529715 All product information and specifications are subject to change without prior notice. Copyright © 2011 PENKO. All Rights Reserved.