The Leading Experts In Weighing & Dosing The type PC2 is a stainless steel single point load cell with complete hermetic sealing. It is a perfect fit for use in harsh industrial environments. ■ Conveyor scales, hopper and tank weighing systems ■ Stainless steel construction ■ Environmental Protection IP68 with complete hermetic sealing ■ Suitable for wall mounting ■ Maximum platform size up to 1 000 x 1 000 mm ■ High input resistance ATEX hazardous area approval for Zone FM hazardous area approval Jacked Weight Available Accessories ■ Compatible range of electronics The load cell is provided with a shielded, 6 conductor cable (AWG 26) or with a shielded, 4 conductor cable (AWG 24). Cable jacket polyurethane The shield is floating or connected to the load cell body + Sense (blue; 6-wire only) - Sense (brown; 6-wire only) - Excitation (black) Shield (yellow)

Load cell PC2: 20kg-150kg Technical Data * corresponds to C3 quality, test certificate not available The limits for Non-Linearity, Hysteresis, and TCRO are typical values. The sum of Non-linearity, Hysteresis and TCRO meets the requirements according to OIML R60 with pi_c=0.7. PENKO Engineering B.V. | Schutterweg 35, 6718 XC Ede | The Netherlands | Tel 0031 (0)318 525630 | Fax 0031 (0)318 529715 All product information and specifications are subject to change without prior notice. Copyright © 2011 PENKO. All Rights Reserved.