FLL PC1
2Pages

Catalog excerpts

The Leading Experts In Weighing & Dosing The type PC1 is a stainless steel single point load cell with an improved potting. It is suitable for use in industrial environments. ■ Bench and floor scales, conveyor scales ■ Wide range of capacities from 7.5 kg to 200 kg ■ Stainless steel construction ■ Maximum platform size up to 600 x 600 mm ■ Integral mounting spacer ■ NTEP approval to 4 500 intervals, Class I ■ ATEX hazardous area approval for Zone ■ FM hazardous area approval M10 mounting threads available acked Weight Available Accessories ■ Compatible range of electronics The load cell is provided with a shielded, 4 conductor cable (AWG 24). Cable jacket polyurethane The shield is connected to the load cell body ■Excitation (black) Shield (yellow)

Open the catalog to page 1

Technical Data Maximum capacity Accuracy class according to OIML R60 Maximum number of verification intervals Minimum load cell verification interval_ Temperature effect on minimum dead load output (TCo) %*R0/10°C Temperature effect on sensitivity (TCRO) %*RO/10°C Combined error_ Creep error (30 minutes) / DR Min. load cell verification interval (vmin opt) Temp, effect on min. dead load output (TCo opt) Rated Output Zero balance Excitation voltage Input resistance _ Output resistance_ Safe load limit_ Ultimate load Safe side load Maximum platform size; loading according to OIML R76 Maximum...

Open the catalog to page 2