FULL LINE LIGHTS
2Pages

ANSI BEAM DISTANCE ANSI PEAK BEAM INTENSITY 2 AA Alkaline* 1 3.7 V, 2600 mAh Lithium-Ion* 2 CR123 Lithium* ANSI LIGHT OUTPUT (LUMENS) ANSI RUNTIME ANSI WATERPROOF ATEX (Ex) & EU APPROVALS* SUBMERSIBLE WATER RESISTANT Light Output Light Output is the total luminous flux. It is the total quantity of emitted overall light energy as measured by integrating the entire angular output of the portable light source. Light output in this standard is expressed in units of lumens. WATER RESISTANT Water Resistant – IPX4 Water splashed against the device from any direction shall have no harmful effects. Run Time Run Time is defined as the duration of time from the initial light output value – defined as 30 seconds after the point the device is first turned on – using fresh batteries, until the light output reaches 10% of the initial value. WATER PROOF/ SUBMERSIBLE Water Proof – IPX7 – Ingress of water in quantities causing harmful effects shall not be possible when the enclosure is temporarily immersed in water under standardised conditions of pressure and time. BEAM DISTANCE Beam Distance is defined as the distance from the device at which the light beam is 0.25 lux (0.25 lux is approximately the equivalent of the light emitted from the full moon “on a clear night in an open field”). Submersible – IPX8 – Ingress of water in quantities causing harmful effects shall not be possible when the enclosure is continuously immersed in water under conditions which shall be stated by manufacturer, but which are more severe than for IPX7. To meet the exacting requirements of ATEX directive 94/9/EC, Peli Lights are tested to ensure that they pose no threat of ignition when operating within hazardous locations. Using approved laboratories, the lights are tested to ensure that they will withstand rigorous impact and drop tests, severe environmental exposure and meet a minimum of IP54 water and dust ingress protection. Longevity and safety are assured by design. Each light certified by ATEX should have a code printed on its body. This code advises the user as to the area in which it can be safely used without risk of explosion. Need more information about ATEX? Please visit www.peli.com * ATEX code corresponding to the 1930Z0 torch BEAM SPREAD LAMP HEADS Rech. NiMH* Rech. NiMH* 12V Rech., Sealed* 12v Rech., Sealed Lead Acid (SLA)* 12v Rech., Sealed Lead Acid (SLA)* 36 per head (24 White, 12 Red) *High **Low For complete warranty details, see www.peli.com/en/warranty Lifetime Guarantee does not cover Roto Moulded cases, AALG products, fabric portion of backpacks or smart phone cover accessories. REMOTE AREA LIGHTING SYSTEMS PELI 1 YEAR LIMITED WARRANTY FOR AALG PRODUCTS: Peli Products, S.L.U. warrants its AALG products to the original purchaser against defects in materials and workmanship for 1 year from the date of purchase. All warranty claims of any nature are barred if the product has been altered or in any way physically changed, or subjected to abuse, misuse, negligence or accident. For complete warranty details, see www.peli.com/en/warranty LIGHTS PELI LIMITED LIFETIME GUARANTEE OF EXCELLENCE: Peli Products, S.L.U. guarantees its lights for a lifetime* against breakage or defects in workmanship. This guarantee does not cover the lamp or batteries. All warranty claims of any nature are barred if the light has been altered, damaged or in any way physically changed, or subjected to abuse, misuse, negligence or accident. *Lifetime guarantee not applicable where prohibited by law. MORE INFORMATION ON WWW.PELI.COM OR DOWNLOAD OUR NEW DIGITAL CATALOGUE WWW.PELICATALOGUE.COM AVAILABLE IN 18 LANGUAGES! *Batteries Included **Batteries Included in Select Packaging *Primary/ Back-up 6.000 (White) 1.200 (Red) *High **Low ***Medium Constant 120V *High **Low ***Medium EUROPE, MIDDLE EAST & AFRICA HQ 23215 Early Avenue Torrance, CA 90505 USA Tel 310.326.4700 800.473.5422 (Outside CA) Fax 310.326.3311 PELI PRODUCTS, S.L.U. C/ Provença, 388 Planta 7 08025 • Barcelona, Spain Tel +34 934 674 999 Fax +34 934 877 393 www.peli.com PELICAN PRODUCTS MIDDLE EAST JAFZA 13 office 032, P.O.Box 261008 Jebel Ali - Dubai United Arab Emirates Tel +971 (0)4 8876550 Fax +971 (0)4 8876549 * We also have offices in Canada, Japan, China, Australia, South Korea and India ©2015 Peli Products, S.L.U. All trademarks are registered and/or unregistered trademarks of Pelican Products, Inc., a U.S. corporation, its subsidiaries and/or affiliates. EU CODE: 0030-SBL-001E APR. 15 CE, RoHS *These approvals are issued for certain battery brands. Additional approvals may apply. For details go to www.peli.com *Translucent **Photoluminescent All details included in this brochure are correct when printed but for most updated information please visit www.peli.com Tough lighting tools FULL LINE BROCHURE IS MY TORCH CORRECTLY CERTIFIED BY ATEX? Peak Beam Intensity Peak Beam Intensity is the maximum luminous intensity typically along the central axis of a cone of light. The value is reported in candela and does not change with distance.

> PERSONAL MEDIUM LIGHTS > PERSONAL SMALL LIGHTS Keychain 1810 LED > PERSONAL LARGE LIGHTS StealthLite™ 3310ELS Emergency Photoluminescent Rechargeable 2460 LED Lighting Station 3310PL LED > RIGHT ANGLE LIGHTS HeadsUp Lite™ 2680 Recoil LED™ > ATEX CAT. 1 AND 2 (Zone 0 & 1) MityLite™ 1900Z1 Zone 1 HeadsUp Lite™ 2610Z0 Zone 0 LED HeadsUp Lite™ 2690Z0 Zone 0 LED HeadsUp Lite™ 2745Z0 Zone 0 LED HeadsUp Lite™ 2755Z0 Zone 0 LED Little Ed™ Rechargeable 3660Z1 Zone 1 LED > REMOTE AREA LIGHTS Nemo™ 2010N 9420XL KIT n 9420 LED worklight n Blow-moulded Case n 2 - Lithium-ion Batteries n DC Vehicle...