1. Catalogs
  2. PEINTURES MAESTRIA
  3. STRIASOL 500 SP V02

STRIASOL 500 SP V02
1 /4Pages

STRIASOL 500 SP V02

STRIASOL 500 SP V02
1 /4Pages

Catalog excerpts

STRIASOL 500 SP V02-1

PEINTURES REVETEMENTS Page 1/4 STRIASOL 500 SP V02Rollable semi-thick epoxy coatingDEFINITION Two-component epoxy coating Applied by roller Solvent free Premises subject to heavy traffic: - Public floor surfaces, industrial and household environments - Loading docks, garages - Nuclear power plants - Chemicals (consult our Technical Department) Note : coating properties, except for the aspect, are not affected by actinic radiation. To obtain an antislippery surface or a nonskid surface it is necessary to use an additive or to sprinkle fillers on the surface , consult our Technical Department. Dry film finish Colour(s) Number of components Mixing ratio by weight Mixing ratio by volume Specific gravity Solids weight Solids volume Induction time at 20°C Pot life of mixing Temperature of product for application Theoritical spreading rate Practical spreading rate According to colour cards SOL, RAL/AFNOR 2 Pour toute autre information, visitez notre site internet : www.maestria.fr Contact : [email protected]

 Open the catalog to page 1
STRIASOL 500 SP V02-2

PEINTURES REVETEMENTS Page 2/4 INSTRUCTIONSSurface preparation Concrete or tiling : previously prepared and coated with an adequate primer. Steel : After grease removal/cleaning operations, abrasive blast cleaning to Sa 2 1/2 (according to ISO 8501-1) with a "mid G" profile roughness according to ISO 8503-2 (Ra 10/13pm). Apply a coat of EPODUX PRIMER 61-134 v01 or of PRIMODUX H, EPODUX IM 209 depending on the painting overcoating time and the recommendations as per our technical data sheets. In case of a concrete or tile after making the surface preparation, a racking operation may be necessary...

 Open the catalog to page 2
STRIASOL 500 SP V02-3

PEINTURES REVETEMENTS Page 3/4 Store at 20°C, 24 hours before Ambient temperature Ambient humidity Substrate humidity Substrate temperature : Minimum : 10°C / Maximum : 30°C 85% maximum No condensation Must be greater than 10°C and 3°C above dew point in order to prevent condensation DRYING / OVERCOATING TIME First cleaning : After complete polymerization of the coating, (7 days at 20°C).Resin-based floor coating systems, such as all seals and floorings, must be well maintained in order to ensurelong-lasting properties and satisfactory results. The recommended cleaning rules must be respected,...

 Open the catalog to page 3
STRIASOL 500 SP V02-4

PEINTURES REVETEMENTS Page 4/4 STRIASOL 500 SP V02 Rollable semi-thick epoxy coating PEINTURES & SYSTEMES Laboratoire Recherche & Developpement - Usine - Administration Z.I. -1, rue Denis Papin - 09100 PAMIERS - Tel. 05 61 67 97 40 - Fax : 05 61 67 05 47 Contact: [email protected] Site internet: www.maestria.fr La presente fiche descriptive a pour but d'informer notre clientele sur les proprietes de notre produit. Les renseignements qui y figurent sont fondes sur nos connaissances actuelles. Toutefois, ces renseignements ne peuvent suppleer a un descriptif approprie a la nature et a I’etat...

 Open the catalog to page 4

All PEINTURES MAESTRIA catalogs and technical brochures

  1. VERNIKAR

    2  Pages

  2. AQUAPORE

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.