WIPERS AND BRUSHES PROFILED WIPERS FOR GUIDES Reproduction of this page is strictly prohibited. P.E.I. srl reserves the right to modify data, drawings and dimensions contained in this catalog without prior notice. Resistant to oils, coolants and hot shavings Resistant to wear Wiper profile has durable flexibility always indicate this measurement! ! always indicate this measurement! guide plane Example of guide mount always indicate this measurement! Example of flange mount Possible method of fastening to guide For work environments with a heavy concentration of sharp shavings . Built to drawings in any shape or size . Single pieces or large series can be manufactured due to no equipment costs . Polyurethane profile resists abrasion and is easily replaced . We must have a drawing with measurements showing the profile of the guides to wipe . Pre-loading is determined by our engineering department based on the shape of the wipe . The wiper measurements refer to free position without pre-load and it is ALWAYS necessary . to indicate the distance measurement between fastening bore and guide plane to weap . For fastening, we recommend counter-sunk hex screws .

WIPERS AND BRUSHES BIPLASTIC WIPERS • • P.E.I. Biplastic Wipers are modelled on the client drawing . Strip-lengths are available in prompt delivery . Profile: Polyurethane Length: 2000 mm . Rigid polymer insert Profile: Polyurethane Length: 2000 mm . Rigid polymer insert 12 Profile: Polyurethane Length: 2000 mm . Steel insert 18x3 Profile: Polyurethane Length: 2000 mm . Steel insert 12x3 FB WIPERS • FB Wipers are modelled on the client drawing or supplied in linear strips . FB 18L Profile: Polyurethane * Length: 530 mm. Stainless steel reinforcement Profile: Polyurethane * Length: 3000 mm. Stainless...

WIPERS AND BRUSHES RA WIPERS RA Wipers are modelled on the client drawing or supplied in linear strips. Also available via our online-shop: https://www.pei.it/index.php/en/shop/wipers 7 Profile: NBR * or Viton® * Length: 560 mm. Steel insert Profile: NBR * or Viton® * Length: 560 mm. Steel insert Profile: NBR * Length: 560 mm. Steel insert Profile: NBR * Length: 560 mm. Steel insert Profile: NBR * or Viton® * Length: 560 mm. Steel insert Profile: NBR * Length: 800 mm. Steel insert Thin metal protective plate in inox steel 301 Profile: NBR * Length: 560 mm. Steel insert Profile: NBR * Length:...

WIPERS AND BRUSHES APPLICATIONS WIPERS FOR TELESCOPIC STEEL COVERS These types of wipers are normally applied to telescopic steel covers . Codes RA B consists of a metal insert to which an NBR profile has been vulcanized . Codes PR 4A and D can be instantly replaced on the telescopic cover, without disassembling the cover itself . They have a metal reinforcement with a seal designed to clean the cover . PR 3 Profile: Polyurethane * Length: 3000 mm. Steel reinforcement Profile: Polyurethane * Length: 3000 mm. Steel reinforcement Profile: Polymeric GM2319 Length: 3000 mm. Steel reinforcement Sold...