TELESCOPIC STEEL COVERS • Standard products Telescopic Steel Covers for all types of machine tools Special supports for lifting heavy covers Special anti-friction brass or non-metallic guides For high speeds, P.E.I. shock absorbers (patented) are inserted in these positions. They are very effective in reducing impact between boxes during movement. For high speeds or weights, special bearings are inserted for smooth, silent movement The steel used is extremely high quality in terms of flatness, corrosion resistance and wear resistance. Sheet thickness ranges from 1.5 to 3 mm. Telescopic Steel Covers may also be made of stainless steel. MULTIBEND The A++ cover for horizontal axes MATHEMATICAL MODEL In-house calculation software specially developed by P.E.I. to calculate bending of the boxes and for consequently optimising geometry and cost savings. WEIGHT REDUCTION ENERGY SAVING Weight reduction of the cover by up to 50 percent compared to a standard telescopic cover. Reduction of the power required for driving the machine tool and abatement of CO2 emissions. Reproduction of this page is strictly prohibited. P.E.I. srl reserves the right to modify data, drawings and dimensions contained in this catalog without prior notice. Wipers made of polyurethane, with or without a protective stainless steel chip guard

TELESCOPIC STEEL COVERS • Standard products Working Positions Vertical position Horizontal position Reproduction of this page is strictly prohibited. P.E.I. srl reserves the right to modify data, drawings and dimensions contained in this catalog without prior notice. Removable closing panel if desired Cover gathered on extensions or support flanges, if desired Profiled guides for secure fastening Snap-on guides available upon request for rapid frontal installation Transverse position Transverse LATHE cover Configurations Only a few standard configurations of Telescopic Steel Covers are shown...

TELESCOPIC STEEL COVERS • Standard products SYNCHRO-TEL The mechanical brace system that synchronizes movement in telescopic covers 1 pivot attached to the box SYNCHRO-TEL TECH: a perfect fit. P.E.I. has reduced the fit tolerance of the metal braces. All pivots are attached to the boxes, avoiding sway of the braces. • SYNCHRO-TEL TECH synchronizes the opening and closure of medium sized telescopic covers and is ideal for working at high speeds and acceleration. It generates minimum stress on the pivots. • It is convenient, SYNCHRO-TEL TECH eliminates any collision between the boxes. • Guaranteed...

TELESCOPIC STEEL COVERS • Standard products Reproduction of this page is strictly prohibited. P.E.I. srl reserves the right to modify data, drawings and dimensions contained in this catalog without prior notice. Metal telescopic cover OVERHAULING P.E.I. staff for field surveys Overhaul of ALL TYPES of telescopic covers for machine tools Revision or replacement of damaged sections Replace riders or guide rollers Replace brass wear strips Clean and buffed to original finish If the telescopic cover cannot be repaired, we can offer you a completely new one . SHORT DELIVERY TIME