Catalogs >
Pedrollo >
VX "VORTEX" Submersible pumps for sewage water

VX "VORTEX" Submersible pumps for sewage water
4Pages

Catalog excerpts

VX "VORTEX" Submersible pumps for sewage water - 1

VX "VORTEX" Submersible pumps ➠ for sewage water PERFORMANCE RANGE INSTALLATION AND USE • • Suitable for use in domestic, civil and industrial applications where the water, such as groundwater, surface water and sewage water, contains suspended solids up to Ø 50 mm. They are suitable for use in applications such as for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. Flow rate up to 500 l/min (30 m³/h) Head up to 15 m APPLICATION LIMITS • • • • 5 m maximum immersion depth Maximum liquid temperature +40 °C Solids passage: – up to Ø 40 mm for VX8-10-15/35 – up to Ø 50 mm for VX8-10-15/50 Minimum immersion depth for continuous service: – 290 mm for VX8-10-15/35 – 320 mm for VX8-10-15/50 PATENTS - TRADE MARKS - MODELS • Patent pending n° BO2008A000494, BO2008A000496 CONSTRUCTION AND SAFETY STANDARDS OPTIONALS AVAILABLE ON REQUEST • • • Complete with 5 m long power cable VXm versions complete with float switch EN 60335-1 IEC 60335-1 CEI 61-150 EN 60034-1 IEC 60034-1 CEI 2-3 • • Pumps with a 10 m long power cable ➠ N.B. Standard EN 60335-2-41 states that the power cable must be 10 m long for outdoor applications Single-phase pumps without float switch Other voltages or 60 Hz frequency GUARANTEE CERTIFICATIONS 294 2 years subject to terms and conditions

Open the catalog to page 1

VX "VORTEX" Submersible pumps for sewage water - 3

VX "VORTEX" POS. COMPONENT CONSTRUCTION CHARACTERISTICS 1 PUMP BODY Cast iron, with threaded port in compliance with ISO 228/1 2 BASE Stainless steel AISI 304 3 IMPELLER Stainless steel AISI 304 VORTEX type 4 MOTOR CASING Stainless steel AISI 304 5 MOTOR CASING PLATE Stainless steel AISI 304 6 MOTOR SHAFT Stainless steel EN 10088-3 - 1.4104 7 SHAFT WITH DOUBLE SEAL AND OIL CHAMBER Seal Shaft Model Diameter MG1-14 SIC Materials Ø 14 mm Stationary ring Rotational ring Elastomer Ceramic Silicon carbide NBR 8 LIP SEAL Ø 15 x Ø 24 x H 5 mm for VX 8-10/35-50 Ø 16 x Ø 24 x H 5 mm for VX 15/35-50 9...

Open the catalog to page 3