Catalogs >
Pedrollo >
VX-I "VORTEX" Submersible pumps for sewage water

VX-I "VORTEX" Submersible pumps for sewage water
4Pages

Catalog excerpts

VX-I "VORTEX" Submersible pumps for sewage water - 1

VX-I "VORTEX" Submersible pumps ➠ for sewage water PERFORMANCE RANGE INSTALLATION AND USE • • Suitable for use with sewage water in domestic, civil and industrial applications or in any other situation, such as with water mixed with mud, with groundwater and with surface water, where the water contains suspended solids. They are suitable for use in applications such as for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. Flow rate up to 400 l/min (24 m3/h) Head up to 10 m APPLICATION LIMITS • • • • 5 m maximum immersion depth Maximum liquid temperature +40 °C Solids passage: – up to Ø 40 mm for VX8/35I - VX10/35I – up to Ø 50 mm for VX8/50I - VX10/50I Minimum immersion depth for continuous service: – 270 mm for VX8/35I - VX10/35I – 300 mm for VX8/50I - VX10/50I PATENTS - TRADE MARKS - MODELS • Patent pending n° BO2008A000494, BO2008A000496 CONSTRUCTION AND SAFETY STANDARDS OPTIONALS AVAILABLE ON REQUEST • • • Complete with 5 m long power cable Float switch for single-phase versions EN 60335-1 IEC 60335-1 CEI 61-150 EN 60034-1 IEC 60034-1 CEI 2-3 • • Pumps with a 10 m long power cable ➠ N.B. Standard EN 60335-2-41 states that the power cable must be 10 m long for outdoor applications Single-phase pumps without float switch Other voltages or 60 Hz frequency GUARANTEE CERTIFICATIONS 270 2 years subject to terms and conditions

Open the catalog to page 1

VX-I "VORTEX" Submersible pumps for sewage water - 3

VX-I "VORTEX" POS. COMPONENT CONSTRUCTION CHARACTERISTICS 1 PUMP BODY Stainless steel AISI 304, with threaded port in compliance with ISO 228/1 2 BASE Stainless steel AISI 304 3 IMPELLER Stainless steel AISI 304 VORTEX type 4 MOTOR CASING Stainless steel AISI 304 5 MOTOR CASING PLATE Stainless steel AISI 304 6 MOTOR SHAFT Stainless steel EN 10088-3 - 1.4104 7 SHAFT WITH DOUBLE SEAL AND OIL CHAMBER Seal Shaft Model Diameter MG1-14 SIC Materials Ø 14 mm Stationary ring Rotational ring Elastomer Ceramic Silicon carbide NBR 8 LIP SEAL Ø 15 x Ø 24 x H 5 mm 9 BEARINGS 6203 ZZ / 6203 ZZ 10...

Open the catalog to page 3

VX-I "VORTEX" Submersible pumps for sewage water - 4

DIMENSIONS AND WEIGHT Typical installation e d h1 DN h p (minimum) a (minimum) b MODEL PORT Single-phase Three-phase VXm 8/35-I – VXm 10/35-I VX 10/35-I VXm 8/50-I – VXm 10/50-I VX 10/50-I DN 1½” DIMENSIONS mm solids passage a Ø 40 mm b 108 h h1 404 d 87 Ø 50 mm 118 p 108 500 60 500 3~ – 10.8 9.3 9.4 – 10.6 variable 434 1~ 9.5 e 50 166 2” kg 9.2 ABSORPTION MODEL VOLTAGE (single-phase) MODEL VOLTAGE (three-phase) Single-phase 230 V 240 V 110 V Three-phase 230 V 400 V 240 V 415 V VXm 8/35-I 3.3 A 3.3 A 7.6 A VX 10/35-I 3.6 A 2.1 A 3.6 A 2.1 A VXm 10/35-I 5.0 A 5.0 A 11.5 A VX 10/50-I 3.6 A...

Open the catalog to page 4