Catalogs >
Pedrollo >
PLURIJET 90-130-200

PLURIJET 90-130-200
4Pages

Catalog excerpts

PLURIJET 90-130-200 STAINLESS STEEL IMPELLERS PLURIJET 90-130-200 STAINLESS STEEL IMPELLERS Self-priming multi-stage pumps Clean water Domestic use Civil use PERFORMANCE RANGE • Flow rate up to 200 l/min (12 m3/h) • Head up to 97 m APPLICATION LIMITS • Manometric suction lift up to 9 m (HS) • Liquid temperature between -10 °C and +40 °C • Ambient temperature up to +40 °C • Max. working pressure 10 bar • Continuous service S1 INSTALLATION AND USE The self-priming PLURIJET pumps are recommended for pumping clean water even in cases where air is present and for liquids which are not chemically aggressive towards the materials from which the pump is made. Because of their silence, reliability and low energy consumption they are recommended for domestic and civil applications, in particular for pressurising and distributing water in combination with pressure tanks, for the recovery of rain water, for irrigation systems, etc. Installation needs to be undertaken in well ventilated closed areas or anyway protected from bad weather. CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 60034-1 CEI 2-3 PATENTS - TRADE MARKS - MODELS • Registered Trade Mark n. 3974301 PLURIJET® • Patent Pending n. EP14755156.8 CERTIFICATIONS Company with management system certified DNV ISO 9001: QUALITY OPTIONS AVAILABLE ON REQUEST • Other voltages or 60 Hz frequency • IPX5 class protection

Open the catalog to page 1

CHARACTERISTIC CURVES AND PERFORMANCE DATA 0 MODEL Single-phase PLURIJETm 5/90 PLURIJETm 6/90 PLURIJETm 3/130 PLURIJETm 4/130 PLURIJETm 5/130 – PLURIJETm 3/200 PLURIJETm 4/200 PLURIJETm 5/200 – Three-phase PLURIJET 5/90 PLURIJET 6/90 PLURIJET 3/130 PLURIJET 4/130 PLURIJET 5/130 PLURIJET 6/130 PLURIJET 3/200 PLURIJET 4/200 PLURIJET 5/200 PLURIJET 6/200 Q = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3B. Three-phase motor efficiency class (IEC 60034-30-1) STANDARD INSTALLATION Non-return valve

Open the catalog to page 2

1 PUMP BODY Stainless steel AISI 304 complete with threaded ports in compliance with ISO 228/1 2 BODY BACKPLATE Stainless steel AISI 304 3 IMPELLERS Stainless steel AISI 304 4 DIFFUSERS Stainless steel AISI 304 5 MOTOR SHAFT Stainless steel AISI 431 Shaft Materials Diameter Stationary ring Rotational ring Elastomer 6 MECHANICAL SEAL Seal Pump Single-phase PLURIJETm 5/90 PLURIJETm 3/130 PLURIJETm 3/200 PLURIJETm 6/90 PLURIJETm 4/130 PLURIJETm 4/200 PLURIJETm 5/130 PLURIJETm 5/200 9 ELECTRIC MOTOR PLURIJETm: single-phase 230 V - 50 Hz with thermal overload protector incorporated into the...

Open the catalog to page 3