Catalogs >
Pedrollo >
MC-I Submersible pumps for sewage water

MC-I Submersible pumps for sewage water
4Pages

Catalog excerpts

MC-I Submersible pumps for sewage water - 1

MC-I "DOUBLE-CHANNEL" Submersible pumps ➠ for sewage water PERFORMANCE RANGE INSTALLATION AND USE • • MC-I submersible pumps are suitable for draining dirty water and sewage in domestic and civil applications. They come equipped with a DOUBLE-CHANNEL impeller and are capable of pumping liquids containing short fibred suspended solids up to Ø 50 mm. They are ideal for pumping sewage water, waste water, surface water and water mixed with mud in locations such as holiday homes and detached homes. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. Flow rate up to 800 l/min (48 m3/h) Head up to 15 m APPLICATION LIMITS • • • • 5 m maximum immersion depth Maximum liquid temperature +40 °C Passage of suspended solids up to Ø 50 mm 300 mm minimum immersion depth for continuous service CONSTRUCTION AND SAFETY STANDARDS • • Complete with 5 m long power cable Float switch for single-phase versions EN 60335-1 IEC 60335-1 CEI 61-150 CERTIFICATIONS EN 60034-1 IEC 60034-1 CEI 2-3 PATENTS - TRADE MARKS - MODELS • Patent pending n° BO2008A000494, BO2008A000496 OPTIONALS AVAILABLE ON REQUEST • • • Pumps with a 10 m long power cable ➠ N.B. Standard EN 60335-2-41 states that the power cable must be 10 m long for outdoor applications Single-phase pumps without float switch Other voltages or 60 Hz frequency GUARANTEE 2 years subject to terms and conditions 274

Open the catalog to page 1

MC-I Submersible pumps for sewage water - 3

MC-I "DOUBLE-CHANNEL" POS. COMPONENT CONSTRUCTION CHARACTERISTICS 1 PUMP BODY Stainless steel AISI 304, with threaded port in compliance with ISO 228/1 2 BASE Stainless steel AISI 304 3 IMPELLER Stainless steel AISI 304 DOUBLE-CHANNEL type 4 MOTOR CASING Stainless steel AISI 304 5 MOTOR CASING PLATE Stainless steel AISI 304 6 MOTOR SHAFT Stainless steel EN 10088-3 - 1.4104 7 SHAFT WITH DOUBLE SEAL AND OIL CHAMBER Seal Shaft Model Diameter Materials MG1-14 SIC Ø 14 mm Stationary ring Rotational ring Elastomer Ceramic Silicon carbide NBR 8 LIP SEAL Ø 15 x Ø 24 x H 5 mm 9 BEARINGS 6203 ZZ /...

Open the catalog to page 3

MC-I Submersible pumps for sewage water - 4

DIMENSIONS AND WEIGHT Typical installation e d h1 DN h p (minimum) a (minimum) b MODEL PORT Single-phase Three-phase MCm 10/50-I MC 10/50-I – MC 15/50-I DIMENSIONS mm solids passage DN 2” a Ø 50 mm b 118 h 166 h1 434 108 d 60 kg e variable 1~ 3~ 10.9 9.5 – 10.5 p 500 500 ABSORPTION MODEL VOLTAGE (single-phase) MODEL VOLTAGE (three-phase) Single-phase 230 V 240 V 110 V Three-phase 230 V 400 V 240 V MCm 10/50-I 5.0 A 5.0 A 11.5 A MC 10/50-I MC 15/50-I 415 V 3.6 A 2.1 A 3.6 A 2.1 A 6.1 A 3.5 A 6.1 A 3.5 A PALLETIZATION MODEL GROUPAGE CONTAINER kg kg n° pumps H (mm) 1~ 3~ n° pumps H (mm) 1~ 3~...

Open the catalog to page 4