Catalogs >
Pedrollo >
F Standardised ?EN 733? centrifugal pumps

F Standardised ?EN 733? centrifugal pumps
28Pages

Catalog excerpts

F Standardised ?EN 733? centrifugal pumps - 1

F Standardised “EN 733” centrifugal pumps PERFORMANCE RANGE INSTALLATION AND USE • • • • • • Flow rate up to 6000 l/min (360 m³/h) Head up to 95 m APPLICATION LIMITS • • • • • Manometric suction lift up to 7 m Liquid temperature between -10 °C and +90 °C Ambient temperature between -10 °C and +40 °C Max. pressure in pump body 10 bar (PN10) Continuous service S1 CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 60034-1 CEI 2-3 Pump body dimensions in compliance with EN 733 Water supply Pressure boosting Irrigation Water circulation in climatisation sets • • • • The pumps must be installed in enclosed places, or at least protected against inclement weather. OPTIONALS AVAILABLE ON REQUEST • • • • Special mechanical seal Other voltages or 60 Hz frequency Compatibility with hotter or colder liquids Compatibility with hotter or colder ambients GUARANTEE 2 years subject to terms and conditions CERTIFICATIONS 126 Cleaning sets Firefighting sets Industrial applications Agricultural applications

Open the catalog to page 1

F Standardised ?EN 733? centrifugal pumps - 20

F 100/160 CHARACTERISTIC CURVES AND PERFORMANCE DATA 50 Hz n= 2900 1/min HS= 0 m F100/160A F100/160B Absorbed power P2 (kW) NPSH (feet) NPSH (metres) H (feet) Head H (metres) F100/160C A P2 (HP) B C Flow rate Q MODEL POWER Three-phase kW HP F 100/160C 15 20 F 100/160B 18.5 25 F 100/160A 22 m³/h 30 l/min H metres Q = Flow rate H = Total manometric head HS = Suction height 0 60 120 180 240 270 300 330 360 0 1000 2000 3000 4000 4500 5000 5500 6000 28 Q 28 25.5 22 17.5 15 12 32 32 30 27 22.5 19.5 17 13 35 35 34 31 27 24.5 22 18 15 Tolerance of characteristic curves in compliance with EN ISO...

Open the catalog to page 20

F Standardised ?EN 733? centrifugal pumps - 23

F POS. COMPONENT CONSTRUCTION CHARACTERISTICS 1 PUMP BODY Cast iron, complete with flanged suction and delivery ports 2 COUNTERFLANGES Steel, complete with ISO 228/1 thread 3a BODY BACKPLATE Cast iron 3b MOTOR BRACKET Cast iron 4 IMPELLER Brass for F32/160, F32/200, F40/160, F40/200, F50/125, F50/160 Cast iron for F40/250, F50/200, F50/250, F65/125, F65/160, F65/200, F65/250, F80/160, F80/200, F80/250, F100/160, F100/200, F100/250 5 MOTOR SHAFT Stainless steel EN 10088-3 - 1.4104 6 MECHANICAL SEAL Pump Seal Shaft Model Model Diameter FN-20 F32/160 F50/125 F32/200 F50/160 F50/200 F65/200...

Open the catalog to page 23

F Standardised ?EN 733? centrifugal pumps - 27

F ABSORPTION MODEL Single-phase Fm 32/160B Fm 40/160C Fm 50/125C VOLTAGE (single-phase) 230 V 15.0 A 15.0 A 15.0 A CAPACITOR Single-phase version Three-phase version 152 240 V 13.8 A 13.8 A 13.8 A MODEL Three-phase F 32/160C F 32/160B F 32/160A F 32/200C F 32/200B F 32/200A F 32/200BH F 32/200AH F 40/160C F 40/160B F 40/160A F 40/200B F 40/200A F 40/250C F 40/250B F 40/250A F 50/125C F 50/125B F 50/125A F 50/160C F 50/160B F 50/160A F 50/200C F 50/200B F 50/200A F 50/200AR F 50/250D F 50/250C F 50/250B F 50/250A F 50/250AR F 65/125C F 65/125B F 65/125A F 65/160C F 65/160B F 65/160A F...

Open the catalog to page 27