Catalogs >
Pedrollo >
F-INOX Stainless steel standardised ?EN 733? pumps

F-INOX Stainless steel standardised ?EN 733? pumps
6Pages

Catalog excerpts

F-INOX Stainless steel standardised ?EN 733? pumps - 1

F-I Stainless steel standardised “EN 733” pumps PERFORMANCE RANGE INSTALLATION AND USE • • • • • • Flow rate up to 2200 l/min (132 m³/h) Head up to 38 m APPLICATION LIMITS • • • • • Manometric suction lift up to 7 m Liquid temperature between -10 °C and +90 °C Ambient temperature between -10 °C and +40 °C Max. pressure in pump body 10 bar (PN10) Continuous service S1 CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 60034-1 CEI 2-3 Pump body dimensions in compliance with: EN 733 CERTIFICATIONS Water supply Pressure boosting Irrigation Water circulation in climatisation sets • • • • Suitable for use with clean, aggressive liquids that are chemically compatible with the materials from which the pump is made. The pump should be installed in an enclosed environment, or at least sheltered from inclement weather. OPTIONALS AVAILABLE ON REQUEST • • • • Special mechanical seal Other voltages or 60 Hz frequency Compatibility with hotter or colder liquids Compatibility with hotter or colder ambients GUARANTEE 2 years subject to terms and conditions 154 Cleaning sets Firefighting sets Industrial applications Agricultural applications

Open the catalog to page 1

F-INOX Stainless steel standardised ?EN 733? pumps - 2

PERFORMANCE RANGE 50 Hz n= 2900 1/min HS= 0 m Head H (metres) F50/160-I F65/125-I Flow rate Q 155

Open the catalog to page 2

F-INOX Stainless steel standardised ?EN 733? pumps - 5

F-I POS. COMPONENT CONSTRUCTION CHARACTERISTICS 1 PUMP BODY Stainless steel AISI 316, complete with flanged suction and delivery ports 2 BODY BACKPLATE Stainless steel AISI 316 4 IMPELLER Stainless steel AISI 316 5 MOTOR SHAFT Stainless steel AISI 316 6 MECHANICAL SEAL Pump Seal Shaft Model Model Diameter F50/160-I F65/125-I FN-24SV Ø 24 mm 9 BEARINGS ELECTRIC MOTOR Pump Stationary ring Rotational ring Elastomer Silicon carbide Silicon carbide Viton Model F50/160-I F65/125-I 7 Materials 6307 ZZ - C3 / 6206 ZZ - C3 F: three-phase 230/400 V - 50 Hz for 4 kW. 400/690 V - 50 Hz from 5.5 to 7.5...

Open the catalog to page 5