Catalogs >
Pedrollo >
EASYPRO

EASYPRO
2Pages

Catalog excerpts

EASYPRO Electronic pump controller PERFORMANCE RANGE EASYPRO® differs from traditional PRESSURE-FLOW REGULATORS as a result of the following innovative characteristics: • the built-in surge tank; • the possibility to select the pump start-up (re-start) pressure; • the back-lit LCD display where the pressure and other useful information is indicated. Max flow rate: 200 l/min (12 m3/h) Working pressure: 10 bar Start-up pressure: values between 1 and 5 bar APPLICATION LIMITS Maximum liquid temperature +65 °C Ambient temperature up to +40 °C Burst pressure: > 40 bar Protection: IP 65 Voltage: 230 V - Frequency: 50/60 Hz - Max current: 16 A CONSTRUCTION AND SAFETY STANDARDS Easy to replace, resin sealed circuit board for complete protection from the effects of humidity. The pressure sensor is housed in a separate area, isolated from the circuit board and current carrying components. The EASYPRO circuit board has passed the most stringent EMC tests for electromagnetic compatibility (low interference emission and high disturbance immunity), guaranteeing reliable operation in any environment. PUMP START-UP PRESSURE EASYPRO makes it possible to select the pump start-up (re-start) pressure between the values of 1 and 5 bar. The pressure selection is made using the command button and by following the instructions that appear on the LCD display. A single model is capable of covering a wide range of installation requirements. SURGE TANK EASYPRO® comes complete with a built-in 3 litre surge tank. The substantial accumulation volume combined with its ability to absorb over-pressure, a typical surge tank characteristic, make it suitable for use in installations where other pressure-flow regulators may prove inadequate. In order to guarantee optimum protection and accumulator performance, it is possible to adjust the tank pressure, the factory setting is 1.8 bar, to suit the pump start pressure selected. PATENTS - TRADE MARKS - MODELS • • • GUARANTEE 2 years subject to terms and conditions Registered Community Design n° 976824 Patent Pending n° BO2008A000155, BO2008A000156 EASYPRO® is a registered trade mark OPTIONALS AVAILABLE ON REQUEST Version with 1” NPT ports Version with cable and Schuko plug and socket

Open the catalog to page 1