PureAir
4Pages

Compressed Air Pre-filtration System Part Number : See back page Service Kit : Contact us for details Your local gas generation partner Description PureAir is a fully integrated and combined compressed air dryer and pre-filtration system designed to remove moisture, dust particulates and hydrocarbons. Delivering a robust, energy efficient and hasslefree compressed air purification for those critical applications where optimum quality ISO8573-1:2010 Class 1.2.1 compliant air source is required. PureAir conveniently integrates pre-filters, desiccant dryers, carbon bed purifiers and post filters into one compact and easy to install unit*. PureAir is the recommended pre-filtration solution to ensure optimum quality inlet gas and full system protection for Peak’s iFlow high purity, high flow nitrogen generator system. *Requires minimal lifetime maintenance, namely desiccant cartridge replacements. Recommended air pre-filtration system for Peak i-Flow and Peak i-FlowLab nitrogen generators Can be used for applications requiring very high quality compressed air Single system for quicker installation and lower costs Low on-going maintenance costs - hassle free Compact, low footprint making most of available space Fully compliant with ISO8573-1:2010 Class 1.2.1 (Contaminants and purity classes) For use with even with oil-free compressors, PureAir removes any contaminants from its source Robust system protection, preventing contaminants entering vulnerable components down-stream Smart energy efficient system, with ultra-economy modes on the larger models (>150 m3/hr) Fully integrated pre-filtration, post-filtration, drying and carbon purifier Self-diagnostics, measures flow into the system and higher flow models measure dryness in the system Copyright 2015 Peak Scientific - Pure Air Data sheet Rev 3 RSID 456 EN - 22/

Many critical applications require an advanced pre-filtration system, the Peak PureAir comes with additional components, namely a triple pre-filter, desiccant dryer technology, and carbon beds for hydrocarbon removal and smart control technology. The additional pre-filters allow the PureAir to ensure the removal of impurities at higher flow rates, from 150m3/hr to 375m3/hr (with larger flows available upon request) the smart control technology measures the dryness (PDP) or the volumetric flow of the air in the system. Communicating this to the desiccant dryer, PureAir will dry the air at...

PureAir quality Refrigerated air dryers, are used to supply compressed air for a Pressure Dewpoint of air from the PureAir system is up to 60 vast array of applications but in many cases the air produced by times dryer than air delivered from a refrigerated air dryer these systems contains high water vapor content not suitable (when processed through the PureAir desiccant dryer at a -40°F (-40°C) as opposed to a refrigerated dryer with a +37.4°F (+3°C) PDP). Furthermore, refrigerated air dryers also operate at a higher Pressure Dewpoint, allowing the growth of micro-organisms, Peak PureAir...

(*) All performance data is based on 7 bar(g) inlet air pressure & 35 deg C ambient temperature. Flow reference conditions, 1 bar (abs), 20 deg C -correction factors required for all other input parameters. Please contact your Peak technical representative for more information. PEAK Protected]” Peak Scientific gas generators define the benchmark in reliability, convenience and performance in laboratories around the world, and come backed by a 12 month warranty. Beyond this period however you can ensure that you're investment continues to be [Protected] by our comprehensive generator care...