PDR IR-C1 SolderLight Professional

Product catalog summary

Overview: The PDR IR-C1 SolderLight Professional is a precision IR handtool system designed for SMT and BGA rework. It utilizes PDR's patented Focused IR technology to provide efficient and precise heating for component rework without affecting adjacent components.

Advanced Features:

Focused IR component heating with tool-free technology.
Quartz IR PCB preheater with a 120mm x 120mm, 750w system.
Multiple temperature time profiles for precise process controls.
Closed-loop temperature control with independent 2-channel component and PCB management.
Ergonomic design for easy setup and use.
In-built vacuum pump with a precise handheld vacuum pick-up tool.

Major Advantages:

No need for nozzles, focus hoods, or shields, accommodating any shape or size component.
Low cost of ownership with nearly zero follow-on costs.
Precise, focused component heating without affecting adjacent components.
Professional Preheat-Reflow-Soak soldering process for excellent process control.
Simple and clean setup with a 100% yield process.

BGA Rework Procedure: The system allows for simple BGA rework by applying flux, preheating the PCB, and using the hand tool to heat and remove components. Replacement involves applying flux, aligning the component, preheating, and reflowing.

Detailed Features and Specifications:

150w, Ø14mm focused IR spot for advanced component heating.
750W medium wave quartz IR PCB preheating system.
Portable PCB workholder with up to 12” x 10” capacity.
PDR type 9 digital control system with multiple profiles for process control.
Optional non-contact IR sensor and standard K-type wire thermocouple for temperature measurement.
In-built electric vacuum pick-up tool with silicon cups.

Benchtop Requirements:

Topheat power: 150 watts IR.
Backheater power: 750 watts IR.
Voltage/frequency: 110/240 volts 50/60Hz.
Typical components: CSPs, BGAs, micro-BGAs, QFPs, PLCCs, SOICs, small SMDs.
Bench area required: 600mm x 600mm.

Contact Information: PDR offers worldwide distribution and support through international distributors. For more details, visit www.pdr-rework.com.

Catalog excerpts

PDR IR-C1 SolderLight Professional Precision IR Handtool System for SMT and BGA Rework

Open the catalog to page 1

www.pdr-rework.com PDR IR-C1 SolderLight Professional Advanced Features • Focused IR component heating PDR’s patented tool-free IR technology • Quartz IR PCB preheater 120mm x 120mm, 750w system • Precise process controls Multiple temperature time profiles • Closed-loop temperature control Independant 2-channel component and PCB • Easy to set up and use Simple, effective, ergonomic design • In-built vacuum pump Precise hand held vacuum pick-up tool Major Advantages • No nozzles, focus hoods or shields Any shape or size component covered • Low cost of ownership Nearly zero follow-on costs • Precise,focused...

Open the catalog to page 2

PDR IR-C1 SolderLight Professional www.pdr-rework.com Simple BGA rework procedure BGA rework requires a system that is able to heat the hidden joints without displacing adjacent components. A system that is safe, gentle, adaptable and, above all, simple to operate. The PDR IR-C1 SolderLight Professional is so easy to operate that technicians are able to instantly achieve excellent process control for BGA/SMT rework without the complexities and frustrations normally associated with ‘high end’ rework systems. Apply flux and preheat PCB To desolder a BGA, simply apply some flux, preheat the PCB,...

Open the catalog to page 3

PDR PDR - Design and Manufacturing Unit 3 Stanley Centre, Kelvin Way Crawley, West Sussex, RH10 9SE, England T: +44 (0)1293 614 000 F: +44 (0)1293 613 600 E: [email protected] PDR America 3869 Dividend Drive, Shingle Springs, CA 95682, USA T: (530) 676 6262 F: (530) 676 6265 E: [email protected] PDR’s products are available worldwide via our international distributors,all offering professional sales and support. For contact, product and company details please visit www.pdr-rework.com www.pdr-rework.com

Open the catalog to page 4

All PDR catalogs and technical brochures

Archived catalogs

PDR IR-C3 Chipmate Rework Station
4 Pages
PDR-IR-C3 chipmate rework station
4 Pages