TOOL HOLDERS CITIZEN CINCOM R04-R07.

YOUR CHOISE N°1 IN TOOLING SYSTEMS PCM WILLEN SA For over 40 years, PCM Willen SA is one of the world’s leading manufacturers of special tool holders for automatic lathes. All our products are developed and manufactured in Switzerland and bear the label «Swiss Made», which is synonymous with precision, quality and reliability. Our company is located in the middle of French-speaking part of Switzerland at the edge of Lake Geneva near Montreux. Our international dealer network ensures continued after sales support. We offer training courses, which we tailor to individual customer requirements....

AXIAL DRILLING / MILLING TOOLS The machining direction of radial tools is usually 0° relative to the drive. These tools make it possible to carry out radial machining on the gear tool. On the backtool block, these tools are used for face machining. These tools are available in different versions such as spindle cooling, transmission, multi-spindle, etc. Polygon tools 15 Static tools 23 Milling / Drilling by Gangtool Milling / Drilling by Backtool Rotation: Cooling : Visit us online: www.pcm.ch Counterclockwise Exterior Without

Axial tools Axial tools Back gang tool post R04/R07 Machines Types Main spindle Position Machines Types To be used with motor and protections of U30B. Back gang tool post Machines Types We strive to publish complete, correct and up-to-date information. However, we take no responsibility for, and make no warranty as to, the accuracy, completeness or frequency of updates. We reserve the right to make changes. Visit us online: www.pcm.ch We strive to publish complete, correct and up-to-date information. However, we take no responsibility for, and make no warranty as to, the accuracy, completeness...

HOBBING TOOLS When gear cutting on a bar-turning machine, make sure that the main spindle turns synchrnously with the tool. For this purpose, the machine manufacturer provides a macro that guarantees synchronism and simplifies programming. The smallest gears have a module of 0.03mm and the largest a module of 2mm. Furthermore spur and helical gears can be produced. Gangtool Gearhobbing tool Visit us online: www.pcm.ch

Hobbing tools Hobbing tools Back gang tool post Machines Types Back gang tool post Notes Adjustable ±2° Servo tuning from FANUC recommended Max. tool Ø10 mm Max. cutter thickness 6 mm Machines Types Notes Adjustable ±1.5° Servo tuning from FANUC recommended Possible collision of the bottom of the U-shaped protective plate at 1.5 ° inclination, modification of this plate may be necessary. Max. tool Ø10 mm Max. cutter thickness 12 mm Back gang tool post Machines Types Adjustable ±1.5° Quick change spindle Servo tuning from FANUC recommended Possible collision of the bottom of the U-shaped protective...

Polygon tools Polygon tools Back gang tool post Machines Types Adjustable ±1.5° Servo tuning from FANUC recommended Max. tool Ø20 mm Max. cutter thickness 12 mm Use the protection and motor from the tool holder U30B We strive to publish complete, correct and up-to-date information. However, we take no responsibility for, and make no warranty as to, the accuracy, completeness or frequency of updates. We reserve the right to make changes. Visit us online: www.pcm.ch We strive to publish complete, correct and up-to-date information. However, we take no responsibility for, and make no warranty as...

POLYGON TOOLS The polygon turning unit has a multitude of inserts, and is synchronized so that when an insert cuts the turning bar stock, it cuts the bar at the same radial position each time the workpiece rotates = counterrun. This enables geometries such as hexes, squares and flats to be machined at faster speeds than by milling. The surfaces can be produced using the grooving method as well as the longitudinal turning method. It can also be used to copy a chamfer (deburring the surface). Backtool axial Polygone or Gangtool radial Polygone. Visit us online: www.pcm.ch

Polygon tools Polygon tools Machines Types Back gang tool post Back gang tool post Servo tuning from FANUC recommended Arbor Ø6mm Max. tool Ø23 mm Max. cutter thickness 7.5 mm Arbor Ø8 mm Max. tool Ø45 mm Max. cutter thickness 4 mm Adjustable ±1.5° Servo tuning from FANUC recommended Arbor Ø6mm Max. tool Ø20 mm Max. cutter thickness 7.5 mm Arbor Ø8 mm Max. tool Ø45 mm Max. cutter thickness 4 mm Use the protection and motor from the tool holder U30B Machines Types Machines Types Back gang tool post Back gang tool post Oil cooling Also for drilling and milling. Milling Ø max: 45mm Use the motor...

Polygon tools Polygon tools Back gang tool post R504-VI Machines Types Upper gang tool post Machines Types Adjustable ±1.5° Servo tuning from FANUC recommended Arbor Ø6mm Max. tool Ø20 mm Max. cutter thickness 7.5 mm Arbor Ø8 mm Max. tool Ø45 mm Max. cutter thickness 4 mm Use the protection and motor from the tool holder U30B Adjustable ±0-1° of shank Ø8 Oil cooling of the tool holder Use the motor and protections of the U30B tool. a “Servo-Tuning” by FANUC is recommanded The first start of the tool holder must be made with the machine manufacturer CITIZEN CINCOM. Back gang tool post Machines...

Polygon tools Polygon tools Upper gang tool post Machines Types Adjustable ±0-1° 3 polygon milling cutters Ø40 BIMU 314R are included (shank Ø8mm + 2 flats of 12.9mm) The shaft Ø8mm can be sloped until 1° A “Servo-Tuning” by FANUC is recommanded The first start of the tool holder must be made with the machine manufacturer. Use the motor and protections of the U30B tool Oil cooling of the tool holder We strive to publish complete, correct and up-to-date information. However, we take no responsibility for, and make no warranty as to, the accuracy, completeness or frequency of updates. We reserve...