Catalogs >
PCI INSTRUMENTS LTD >
Tank Contents Gauge TK100 (TANKPRESS 100)

Tank Contents Gauge TK100 (TANKPRESS 100)
4Pages

Catalog excerpts

Tank Contents Gauge TK100 (TANKPRESS 100) - 1

Data sheet Date Page REMOTE READING TANK CONTENTS GAUGE TANKPRESS TECHNICAL CHARACTERISTICS Diameters: 160 mm Case and ring: st. st. 304, with bayonet bezel Protection degree : IP65 (IEC529) Window: acrylic Movement: st. st., reinforced Dial: aluminium with black numerals on white background Pointer: aluminium, black painted Sensing element: Viton Connection dimension: ½”NPTM or BSP (1/4” for DN63) Mounting: type C surface mounting, bottom connection Ranges: As requested The TK100 tank contents gauge has been designed to give a simple but effective continuous read-out of tank contents. This instrument works by taking the pressure above the point at which the sensor is installed and displaying it remotely via a capillary to the gauge. HOW TO ORDER Please specify: model, (fill in tank questionnaire) Please note the accuracy of the instrument is only as accurate as the measurements given. These models are made from stainless steel and are weatherproof. They are suitable for use on any liquid that does not attack 304 stainless steel or viton. They have the following advantages: • • • • • Fully automatic, continuous readouts No power required Simple to install Safe in hazardous environments Capillary up to 30m _______________________________________________________________________________________________ PCI (Process System Solutions) Ltd, Unit 7 Slaidburn Crescent, Southport, Merseyside, PR9 9YF, UK, Tel: +44 (0) 1704 509090, Fax: +44 (0) 1704 509091, email: sales@pci-instruments.com, Website: www.pci-instruments.com (Specifications are subject to change without notice)

Open the catalog to page 1

Tank Contents Gauge TK100 (TANKPRESS 100) - 2

Data sheet Date Page Overall length Cylindrical length Position central Diameter Dished End Height of transmitter above cylinder base Access cover height Distance below tank Indicator size Transmitter fitted at low or high end Length of capillary Type of sensor Type of liquid Specific gravity Temperature Calibration Litres / Gallons etc Is tank vented If tank lagged internal measurement required _______________________________________________________________________________________________ PCI (Process System Solutions) Ltd, Unit 7 Slaidburn Crescent, Southport, Merseyside, PR9 9YF, UK,...

Open the catalog to page 2

Tank Contents Gauge TK100 (TANKPRESS 100) - 3

Data sheet Date Page Height of transmitter above tank base Specific gravity Access cover height Calibration Litres / Gallons etc Is tank vented Transmitter fitted at low or high end Indicator size If tank lagged internal measurement required _______________________________________________________________________________________________ PCI (Process System Solutions) Ltd, Unit 7 Slaidburn Crescent, Southport, Merseyside, PR9 9YF, UK, Tel: +44 (0) 1704 509090, Fax: +44 (0) 1704 509091, email: sales@pci-instruments.com, Website: www.pci-instruments.com (Specifications are subject to change...

Open the catalog to page 3

Tank Contents Gauge TK100 (TANKPRESS 100) - 4

Data sheet Date Page Overall length Transmitter fitted at low or high end Position measured from low end Height of transmitter above cylinder base Specific gravity Access cover height Distance below tank Calibration Litres / Gallons etc Indicator size Cylindrical length Is tank vented If tank lagged internal measurement required _______________________________________________________________________________________________ PCI (Process System Solutions) Ltd, Unit 7 Slaidburn Crescent, Southport, Merseyside, PR9 9YF, UK, Tel: +44 (0) 1704 509090, Fax: +44 (0) 1704 509091, email:...

Open the catalog to page 4